Bunn MCAA Cleaning the SPRAYHEAD/SEAL, Assembling the SPRAYHEAD/SEAL, Periodic CLEANING/DESCALING

Page 16

PERIODIC CLEANING/DESCALING (Cont.)

8)When the cycle has finished, empty the container. Repeat step 7 at least two more times to remove the solution from the tank.

9)Clean the pod holder with a mild detergent and rinse thoroughly.

10)Proceed to the “Cleaning The Sprayhead/Seal” section.

CLEANING THE SPRAYHEAD/SEAL

1)Press the Power Switch into the off “O” position.

2)Unplug the brewer and allow it to cool down. (Minimum of 1 hour.)

3)After the unit has been allowed to cool, remove the pod holder and set aside.

4)Using your fingers, rotate the sprayhead/seal assembly

clockwise until the sprayhead and seal are removed.

 

NOTE: If the sprayhead and seal are separated, they must be

 

reassembled as they were when removed from the brewer.

 

CAUTION: Improper reassembly could result in personal injury

 

from scalding water.

 

NOTE: See “Assembling Sprayhead/Seal” (Page 16) & “Inspecting

 

Sprayhead Seal” (Page 17) for more information.

 

5) Clean the sprayhead and seal with a mild detergent and rinse

P3015

thoroughly.

 

6)Using your fingers, rotate the sprayhead/seal assembly counter-clockwise until it is finger tight.

7)Replace the pod holder.

8)Plug in the brewer and press the Power Switch to restore power to the brewer.

ASSEMBLING THE SPRAYHEAD/SEAL

If the sprayhead and seal are separated during removal or cleaning, they must be reassembled properly.

1)Identify the top of the seal. The top of the seal that seats against the roof of the sprayhead ramp has a rough ridge that can be felt by running your fingers across the surface of the seal. The bottom is smooth.

2)Identify the top of the sprayhead. The top of the sprayhead has a star pattern and a threaded hole where the sprayhead attaches to the brewer.

3)While carefully stretching the seal, guide the sprayhead into the channel of the seal. Make sure it is completely in the channel.

When properly assembled, the sprayhead will slide easily into the channel of the seal and will not cause any buckles in the surface of the seal. If the sprayhead seems to be difficult to seat, and you must stretch the seal more than a slight tug, the assembly is not together correctly.

CAUTION: Improper reassembly could result in personal injury from scalding water.

Top

P2953

Top

P2953

P2953

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents My Café Automatic Tea & Coffee Pod Brewer 37268.0001B 10/05 2005 BUNN-O-MATIC CorporationTable of Contents User Notices Introduction SpecificationsImportant Handling Information Important Safeguards Do not use brewer for other than its intended useGeneral Information Features & Controls Control PanelComponents DefinitionsControl Panel Features Control PanelWater Inlet SET-UP Plumbing RequirementsPlumbing HOOK-UP Strainer/flow control Provided tubeInitial Brewer SET-UP For pour-over set-up, go to Pour-Over Section onSee page 14 for brewing tips Brewing Delicious Coffee or TEAPress a pod into the pod holder For Automatic set-up, go to Automatic Section on Thoroughly rinse the water reservoirFresh cold water Button to fill Internal Water TankClose the slide lid Open the slide lidDispose of the used pod. Do Not Touch Hot Pod Coffee Fundamentals HOT WaterBrewing Tips Periodic CLEANING/DESCALING Will hold at least 414 ml 14 oz. of liquid, and pressPeriodic CLEANING/DESCALING Cleaning the SPRAYHEAD/SEALAssembling the SPRAYHEAD/SEAL Cleaning the POD Holder Inspecting the Sprayhead SealCycling the Brewer Storing the BrewerTroubleshooting ExplanationPOD Holder is missing Troubleshooting Water leaks out around the sprayheadIndicator coming on during a brew cycle is normal Dishwasher Safe Bunn Replacement PartsDishwasher safe. Catches up to 177 ml 6 oz. of liquid Limited Warranty

MCAA specifications

The Bunn MCAA, or Bunn Multi-Commercial Automatic Brewer, is a highly regarded coffee brewing system designed for commercial use. Its innovative features and reliable performance make it a popular choice among cafes, restaurants, and other foodservice establishments seeking to deliver high-quality coffee consistently.

One of the standout features of the Bunn MCAA is its capacity to brew large volumes of coffee quickly. This machine can brew up to 3.8 gallons of coffee per hour, allowing busy establishments to keep up with high demand during peak hours. The brewer comes with multiple brew baskets, enabling it to produce different coffee blends simultaneously, catering to diverse customer preferences.

The Bunn MCAA incorporates advanced brew technology, including digital temperature control and pre-infusion settings. This technology ensures optimal extraction, enhancing the coffee's flavor profile and delivering a rich and aromatic brew. The ability to fine-tune temperature settings allows baristas to achieve the perfect brew for various coffee beans, enhancing the overall customer experience.

Equipped with a stainless steel construction, the MCAA is designed for durability and longevity. Its robust design can withstand the rigors of a busy commercial environment without compromising performance. Additionally, the machine features an easy-to-clean design, with removable components that simplify maintenance and ensure consistent hygiene.

The Bunn MCAA also includes a digital display, making it user-friendly. The interface enables operators to program brewing times and set parameters for different coffee types easily. This feature not only streamlines the brewing process but also ensures that each cup meets the expected quality standards.

Moreover, the Bunn MCAA supports a variety of brewing methods, including iced coffee and specialty brews. The versatility of the machine allows establishments to expand their beverage offerings, catering to a wider audience. With options for both traditional hot brews and iced coffee, establishments can maximize profitability by appealing to seasonal trends.

In summary, the Bunn MCAA stands out as a powerful, efficient, and versatile brewing solution for commercial coffee environments. With its capacity to produce large quantities of high-quality coffee, advanced brewing technology, and durable construction, it is an invaluable asset for any establishment dedicated to serving excellent coffee. Its user-friendly interface and maintenance-friendly design further enhance its appeal, making the Bunn MCAA a top choice in the competitive coffee brewing market.
Top Page Image Contents