Extron electronic DVI DL 201 Rx Introduction, About this Manual, About the DVI DL 201 Tx/Rx

Page 10

Introduction

About this Manual

This manual contains information about the DVI DL 201 Tx/Rx signal transmitter and receiver, with information on how to mount, install, and operate these units.

In this manual, unless otherwise specified, the terms "DVI DL 201" or "DVI DL 201 Tx/Rx" refer to both the transmitter (DVI DL 201 Tx) and the receiver (DVI DL 201 Rx). The term "transmitter" refers to the DVI DL 201 Tx, and "receiver" refers to the DVI DL 201 Rx.

About the DVI DL 201 Tx/Rx

The DVI DL 201 Tx and DVI DL 201 Rx are dual link DVI transmitter/receiver units. They can be purchased as a pair or as individual units.

Each purchased pair and each individual unit is shipped with a single external desktop 12 VDC power supply. A single power supply, connected to the transmitter, is able to power both devices.

Using three CAT 5/5e/6/7 twisted pair cables, DVI-D signals can be extended up to 100' (30 m) at resolutions up to 2560 x 1600 @ 60 Hz. This is significantly further than the 15' (5 m) specified for standard dual link DVI cables.

NThe DVI DL 201 Tx/Rx works with unshielded twisted pair (UTP) cable or shielded twisted pair (STP) cable. However, STP cables are required to ensure FCC Class A and CE compliance.

DVI DL 201 Tx/Rx Features

Transmits dual link DVI-D signals over three CAT 5/5e/6/7 cables — Standard twisted pair cables provide an economical, easily installed cable solution.

Long distance transmission — Signals are transmitted up to 100' (30 m), which is significantly further than the 15' (5 m) specified for standard dual link DVI cables.

Local monitor output — The transmitter has a DVI-D output for connection to a local monitor.

DDC routing to local or remote display — A two pole switch allows the user to determine whether DDC signals are routed to the local or the remote display device.

1-2 DVI DL 201 Tx/Rx • Introduction

Image 10
Contents DVI DL 201 Tx/Rx Dual Link DVI Transmitter and ReceiverPrecautions Safety Instructions English安全须知 中文 FCC Class a NoticePage Connect the display to the local monitor output Power on the source deviceQuick Start Guide -­ DVI DL 201 Tx/Rx Amber while the Edid information is readQuick Start Guide -­ DVI DL 201 Tx/Rx, cont’d To use DDC pass-through routed to the local monitorTable of Contents Table of Contents, cont’d One DVI DL 201 Tx/RxAbout this Manual DVI DL 201 Tx/Rx FeaturesIntroduction About the DVI DL 201 Tx/RxTypical Application for the DVI DL 201 Tx/Rx Extron DVI DL 201 TxIntroduction, cont’d Two Mounting the DVI DL 201 Tx/Rx InstallationTabletop placement Rack mountingRack mounting procedures Installing the DVI DL 201 Tx on a rack shelfUnder-desk mounting Installation, cont’dUnder-desk mounting the DVI DL 201 Tx Through-desk mounting Through-desk mounting the DVI DL 201 RxPole mounting Projector mounting the DVI DL 201 RxDVI DL 201 Tx/Rx Installation DVI DL 201 Tx front panel features Installation, cont’d Panel FeaturesDVI DL 201 Tx front panel features DVI DL 201 Tx rear panel features DVI DL 201 TxDVI DL 201 Rx front panel features DVI DL 201 Rx front panel featuresDVI DL 201 Rx rear panel features DVI DL 201 Rx rear panel featuresDVI-D input Installation, cont’d Cable Connections and SwitchesDVI-D output Pin Signal Twisted pair output/input Terminating shielded cableConnections TIA/EIASingle Link/Dual Link DVI Video ResolutionSingle Link Mode Dual Link Mode 60 HzDDC switches Off positionControl pass-through Signal S, from the control device to RS-232 signalsIR signals Tx to Tx Rx to Rx Ground toPower input Connecting power to DVI DL 201 Tx/RxThree Configuration Configuration and OperationUsing the Edid Minder to read and store Edid from a display Connect the source device to the transmitter Input Using the Edid Minder with the default EdidSet the Edid Minder switch to the on up Connect the display device to the receiverUsing pass-through mode with DDC routed to a local monitor Configuration and Operation, cont’dPower on the display device Power on the local monitor, if required Configuration and Operation, cont’d Setup TroubleshootingDVI DL 201 Tx/Rx Configuration and Operation Configuration and Operation, cont’d AAppendix a Video SpecificationsReference Information Video input and loop-through transmitterControl/remote external device pass-through Video output receiverGeneral Warranty Years parts and labor Enclosure dimensionsDepth excludes connectors #60 ‑604 ‑20Accessory Part number Optional AccessoriesIncluded parts Replacement Part number Included PartsReference Information Extron’s Warranty USA, Canada, South America Japan Central AmericaExtron Electronics. All rights reserved
Related manuals
Manual 2 pages 7.32 Kb

DVI DL 201 Tx, DVI DL 201 Rx specifications

Extron Electronics is renowned for its high-quality audio-visual solutions, and their DVI DL 201 TX/RX and DVI DL 201 RX are no exception. These devices are designed to facilitate digital video signal transmission over long distances, making them ideal for professional AV setups in educational institutions, corporate environments, and large venues.

The Extron DVI DL 201 TX (transmitter) and DVI DL 201 RX (receiver) feature advanced technology that supports DVI Dual Link video signals. This capability allows for the transmission of high-resolution video up to 2560x1600 at 60Hz, ensuring crisp and clear visuals essential for modern presentations and video playback.

One of the standout features of the DVI DL 201 series is its ability to extend DVI signals up to 200 feet (60 meters) using a single CAT 6 cable. This long-distance capability is particularly beneficial in expansive installations where traditional cabling may not suffice. The use of Exton’s advanced technology allows these devices to maintain signal integrity even at longer distances, mitigating concerns about video degradation.

The DVI DL 201 TX/RX is equipped with hot-plug detection, ensuring that both the transmitter and receiver can automatically recognize connected devices without the need for manual intervention. This enhances ease of use and simplifies the setup process for system integrators. Additionally, the devices are designed with a compact form factor, allowing for flexibility in installation without taking up excessive space.

Another notable characteristic of the DVI DL 201 series is its compatibility with a range of DVI sources and displays, making it a versatile solution in mixed technology environments. This flexibility, combined with their durability, makes these devices a reliable choice for any AV installation.

Furthermore, Extron incorporates thorough engineering in their products, ensuring that both the DVI DL 201 TX and RX meet high standards of performance and reliability. The devices are backed by Extron’s comprehensive support and warranty services, providing peace of mind for end-users.

In conclusion, the Extron DVI DL 201 TX/RX and DVI DL 201 RX introduce a robust solution for extending DVI signals, ensuring high-quality video transmission across considerable distances. With their advanced features and technologies, they are an excellent choice for any professional AV application.