29
Assembling the Backguard
Before installing the cooker, assemble the backguard “V” (fig. 31).
Please note that :
–The backguard “V” can be found packed at the rear of the cooker.
–Before assembling remove any protective film/adhesive tape.
–The backguard must be fixed to the cooktop using the three supports “B” supplied with the appliance (see fig. 31).
B |
A |
V |
Fig. 31 |
Fitting the Adjustable Feet
–The adjustable feet must be fitted to the base of the cooker before use.
–Rest the rear of the cooker an a piece of the polystyrene packaging exposing the base for the fitting of the feet.
–Fit the 4 legs by screwing them tight into the support base as shown in picture 33.
WARNING
When raising cooker to upright position always ensure two people carry out this manoeuvre to prevent damage to the adjustable feet (fig. 34).
Fig. 32 | Fig. 33 |