Antunes, AJ SE-4200/4400 Operation, Filtration Process, Operating Controls Figure Function Button

Page 10

SE-4200/4400 WATER FILTRATION SYSTEM

OPERATION

Filtration Process

The filtration process includes a Filtration Cycle and a Backwash Cycle.

During the Filtration Cycle, water enters the system inlet port and passes through the filter elements before exiting via the Permeate outlet.

This system is designed so that no valves are powered during the Filtration Cycle. This allows water to contin- ue to be filtered during a power outage and it minimizes electrical power consumption.

After a period of time, the filters have to be cleaned. This is accomplished through the Backwash Cycle.

During the Backwash Cycle, filtered water from one of the cartridges is fed back through the other cartridge to break up any debris collected on the membrane walls.

The Backwash Cycle includes a forward flush step which then uses the feed water to flush away the loos- ened debris from the cartridge’s membranes. The valves are only powered during the flushing cycle and in STOP MODE.

NOTE: Both the Filtration and Backwash cycles can be completely automated through the Control Panel. See the Programming section within this manual.

Operating Controls (Figure 2)

Control

Function

Button

 

FLUSH

Performs a QUICK FLUSH operation

 

when actuated during FILTER MODE or

 

STOP MODE.

RUN

Initializes and starts an internal timer for

 

the automatic flushing of the system and

 

puts the system into FILTER MODE.

 

When pressed, the system performs a

 

BORE AIR RELEASE operation before

 

entering FILTER MODE.

STOP

Stops all functions immediately; pow-

 

ers all valves. Closes the Input and

 

Permeate ports/valves and opens all

 

Drain ports/valves.

F1

Starts the Backwash Cycle during

 

FILTER MODE or STOP MODE.

F2

Service Feature. Valve, Transducer,

 

and alarm status can be viewed and

 

changed. Press and hold this button for

 

a minimum of 3 seconds to access this

 

mode.

CURSOR

Up/Down/Left/Right arrow buttons

 

are used to scroll through the choices

 

shown in the Message Display window.

MENU

Allows access to program and setting

 

features .

ENTER

Used to confirm settings in MENU

 

mode.

FLUSH

Message Display

RUN

STOP

MENU

F1

F2

ENTER

Figure 2. Operating Controls

10

P/N 1010852 Rev. C 04/06

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Water Filtration System Table of Contents Owner InformationImportant Safety Information Service/Technical AssistanceImportant Safety Information Specifications Specifications DimensionsSuggested Tools and Supplies for Installation InstallationEquipment Setup UnpackingInstallation Locating and Mounting the systemSE-4200/4400 Water Filtration System Filtration Process OperationOperating Controls Figure Function Button Programming OperationMessage Description SET Quickflush Mode Technical Service immediately for assistance Password. Leave the Demand Sensor optionIf you cannot remember your password, call To off, the system will then display the DemandUsing this function Proper operation of the system. The passwordFlush, and feature settings from being changed Function should only be used to protect the timeOperating the Unit Checking the Controller Program MaintenanceChanging the Cartridges Troubleshooting Problem Possible Cause Corrective ActionTroubleshooting Replacement Parts SE-4200/4400 Inset aReplacement Parts SE-4200/4400 Part Description QtyWiring Diagram SE-4200/4400 Water Filtration System SE-4200/4400 Water Filtration System Limited Warranty

SE-4200/4400 specifications

The Antunes AJ SE-4200/4400 is a state-of-the-art food service equipment model specifically designed for commercial kitchens seeking efficiency, reliability, and precision in cooking. This versatile cooking solution offers operators the ability to prepare a wide range of menu items with unmatched speed and consistency, making it an ideal choice for fast-casual restaurants, hotels, and catering services.

One of the standout features of the Antunes AJ SE-4200/4400 is its advanced cooking technology. Utilizing a combination of radiant heat and high-velocity, impinged air, this model ensures that food is cooked evenly and thoroughly. The dual cooking technology significantly reduces cooking times while delivering superior product quality. This efficient cooking method not only streamlines kitchen operations but also enhances customer satisfaction by providing perfectly cooked meals in minimal time.

The design of the AJ SE-4200/4400 emphasizes user-friendliness, which is crucial in a bustling kitchen environment. Equipped with a digital touch control panel, operators can easily navigate cooking settings, adjust temperatures, and set timers for various menu items. This intuitive interface allows for quick training of staff, reducing learning curves and enabling seamless transitions between different team members.

In addition to its cooking capabilities, the Antunes AJ SE-4200/4400 is designed for easy maintenance. Its stainless steel construction not only ensures durability but also simplifies cleaning and sanitization, adhering to industry standards. The model is constructed with removable components, making it easier for staff to perform routine maintenance tasks without the need for specialized tools.

Another significant advantage of the Antunes AJ SE-4200/4400 is its versatility in cooking applications. Whether preparing sandwiches, pizzas, or other baked goods, this equipment is equipped to handle various food items with precision, enhancing menu flexibility and allowing for creativity in food presentation.

Energy efficiency is also a key consideration in modern food service equipment, and the AJ SE-4200/4400 does not disappoint. Its design is optimized to consume less energy while maintaining high performance levels, allowing operators to reduce operational costs and limit their environmental impact.

The Antunes AJ SE-4200/4400 represents the next step in commercial cooking technology, offering features that cater to the evolving needs of the food service industry. With its combination of innovative cooking methods, user-friendly controls, easy maintenance, and versatility in applications, this model stands out as a premier choice for operators looking to elevate their kitchen operations and delight their customers.
Top Page Image Contents