Antunes, AJ SE-4200/4400 owner manual Operation, Programming, Message Description

Page 11

SE-4200/4400 WATER FILTRATION SYSTEM

OPERATION (continued)

Programming

1.Once the system is connected to a power source, the unit displays the following messages in the table below in order:

 

Message

 

Description

ANTUNES FILTRATION

Shows the software and

Rev. 00.00.00

 

hardware revision informa-

 

tion.

 

 

 

ver-

BASIC ON:lcd

ON

Indicates the system hard-

units- US:audio ON

ware setup.

 

 

 

 

 

BORE

AIR RELEASE

 

Indicates the unit is filling

00:05

mm:ss

 

filters with water.

 

 

 

 

 

STOP MODE

 

Indicates the controller is

00/00/00 00:00:00

AM

performing internal tests to

verify correct filter operation.

 

 

 

FILTER MODE

 

Indicates the unit is in

00/00/00 00:00:00

AM

FILTER MODE.

 

 

 

 

 

Using the Up and Down arrow buttons, enter the correct date in mm/dd/yy format. After each entry, press the Enter button. For example, for June, set the month as 06 and then press the Enter button. Set the date and year in this same manner.

5The system then displays the SET TIME message. Using the Up and Down arrow buttons, enter the correct hour in hh format and press the Enter but- ton. Then, enter the correct minutes in mm format and press the Enter button. Finally, select AM or PM and press the Enter button.

6.After setting the date and time, the system dis- plays the SET DATE/TIME message. If you need to make a correction to your settings, you can press the Enter button and make any changes. If the settings are correct, press the Menu button to return to the STOP MODE function. The correct date and time should be displayed.

After the system displays the FILTER MODE message, proceed to the next step.

NOTE: Only a few items need to be programmed to allow for the proper operation of the system. Default values in the system programming are set to automatically flush the filter cartridges for 1 min- ute every hour. Default values should be sufficient for most locations’ filtration needs.

NOTE: To skip a value, accept a default value, or to save a changed value, you MUST press the Enter button to save the entry and proceed to the next option. If you make a mistake, press the Menu but- ton to go back to the previous display.

SET DATE/TIME MODE

NOTE: The Date and Time must be set in order for proper system operation.

1.If the system does not already display the SET DATE/TIME message, from the FILTER MODE, press the Stop button. The system enters STOP MODE and displays STOP MODE on the display.

2.Press the Menu button.

3.Using the Up and Down arrow buttons, scroll from SET PASSWORD to SET DATE/TIME and press the Enter button.

4.The system displays the SET DATE message.

7.Press the Run button to return to the FILTER MODE function.

SET FILL FUNCTION MODE (BORE AIR RELEASE)

1.From the FILTER MODE display, press the Stop button. The system displays the STOP MODE message.

2.Press the Menu button.

3.Using the Up and Down arrow buttons, scroll from SET PASSWORD to SET FILL FUNCTION. Press the Enter button.

4.The system displays the BORE AIR RELEASE message. The default time is displayed as 00:05 seconds, which should be sufficient for most locations. To change this setting, use the Up and Down arrow buttons and the Enter key to make the change. For example, to change the setting to six, press the Enter button until the cur- sor is in the fourth position and use the Up/Down arrow buttons to change the setting to the desired time.

5.Next, the system displays the SET FILL FUNCTION display. If you need to make a cor- rection to the Fill Function setting, press the Enter button to do so. If the setting is correct, Press the Menu button to save the setting and return to

STOP MODE.

6.Press the Run button to return to FILTER MODE.

P/N 1010852 Rev. C 04/06

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Water Filtration System Owner Information Table of ContentsService/Technical Assistance Important Safety InformationImportant Safety Information Specifications Dimensions SpecificationsUnpacking InstallationEquipment Setup Suggested Tools and Supplies for InstallationLocating and Mounting the system InstallationSE-4200/4400 Water Filtration System Operating Controls Figure Function Button OperationFiltration Process Message Description OperationProgramming SET Quickflush Mode To off, the system will then display the Demand Password. Leave the Demand Sensor optionIf you cannot remember your password, call Technical Service immediately for assistanceFunction should only be used to protect the time Proper operation of the system. The passwordFlush, and feature settings from being changed Using this functionOperating the Unit Changing the Cartridges MaintenanceChecking the Controller Program Problem Possible Cause Corrective Action TroubleshootingTroubleshooting Inset a Replacement Parts SE-4200/4400Part Description Qty Replacement Parts SE-4200/4400Wiring Diagram SE-4200/4400 Water Filtration System SE-4200/4400 Water Filtration System Limited Warranty

SE-4200/4400 specifications

The Antunes AJ SE-4200/4400 is a state-of-the-art food service equipment model specifically designed for commercial kitchens seeking efficiency, reliability, and precision in cooking. This versatile cooking solution offers operators the ability to prepare a wide range of menu items with unmatched speed and consistency, making it an ideal choice for fast-casual restaurants, hotels, and catering services.

One of the standout features of the Antunes AJ SE-4200/4400 is its advanced cooking technology. Utilizing a combination of radiant heat and high-velocity, impinged air, this model ensures that food is cooked evenly and thoroughly. The dual cooking technology significantly reduces cooking times while delivering superior product quality. This efficient cooking method not only streamlines kitchen operations but also enhances customer satisfaction by providing perfectly cooked meals in minimal time.

The design of the AJ SE-4200/4400 emphasizes user-friendliness, which is crucial in a bustling kitchen environment. Equipped with a digital touch control panel, operators can easily navigate cooking settings, adjust temperatures, and set timers for various menu items. This intuitive interface allows for quick training of staff, reducing learning curves and enabling seamless transitions between different team members.

In addition to its cooking capabilities, the Antunes AJ SE-4200/4400 is designed for easy maintenance. Its stainless steel construction not only ensures durability but also simplifies cleaning and sanitization, adhering to industry standards. The model is constructed with removable components, making it easier for staff to perform routine maintenance tasks without the need for specialized tools.

Another significant advantage of the Antunes AJ SE-4200/4400 is its versatility in cooking applications. Whether preparing sandwiches, pizzas, or other baked goods, this equipment is equipped to handle various food items with precision, enhancing menu flexibility and allowing for creativity in food presentation.

Energy efficiency is also a key consideration in modern food service equipment, and the AJ SE-4200/4400 does not disappoint. Its design is optimized to consume less energy while maintaining high performance levels, allowing operators to reduce operational costs and limit their environmental impact.

The Antunes AJ SE-4200/4400 represents the next step in commercial cooking technology, offering features that cater to the evolving needs of the food service industry. With its combination of innovative cooking methods, user-friendly controls, easy maintenance, and versatility in applications, this model stands out as a premier choice for operators looking to elevate their kitchen operations and delight their customers.
Top Page Image Contents