Antunes, AJ SE-4200/4400 owner manual Important Safety Information

Page 4

SE-4200/4400 WATER FILTRATION SYSTEM

IMPORTANT SAFETY INFORMATION (continued)

The following warnings and cautions appear throughout this manual and should be carefully observed.

•Turn the unit off, disconnect the power source, and allow unit to cool down before performing any service or maintenance on the unit.

•The equipment should be grounded accord- ing to local electrical codes to prevent the possibility of electrical shock. It requires a grounded receptacle with separate electrical lines protected by fuses or a circuit breaker of the proper rating.

•All electrical connections must be in accor- dance with local electrical codes and any other applicable codes.

•WARNING, ELECTRICAL SHOCK HAZARD. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

-Electrical ground is required on this appli- ance.

-Do not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

-Do not use an extension cord with this appliance.

-Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.

•If the supply cord is damaged, it must be replaced by the manufacturer or its service agency or a similarly qualified person.

•This equipment is to be installed to comply with the local plumbing code and any other applicable code.

•Water pressure must not exceed the mem- brane burst pressure of 7 bar (100 psi). To reduce water pressure, install a water pres- sure regulator and set the water pressure to suit application. Note that trans membrane pressure (inlet water pressure) must be .5 - 2.5 bar (7 - 36 psi).

4

P/N 1010852 Rev. C 04/06

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Water Filtration System Table of Contents Owner InformationImportant Safety Information Service/Technical AssistanceImportant Safety Information Specifications Specifications DimensionsInstallation Equipment SetupSuggested Tools and Supplies for Installation UnpackingInstallation Locating and Mounting the systemSE-4200/4400 Water Filtration System Filtration Process OperationOperating Controls Figure Function Button Programming OperationMessage Description SET Quickflush Mode Password. Leave the Demand Sensor option If you cannot remember your password, callTechnical Service immediately for assistance To off, the system will then display the DemandProper operation of the system. The password Flush, and feature settings from being changedUsing this function Function should only be used to protect the timeOperating the Unit Checking the Controller Program MaintenanceChanging the Cartridges Troubleshooting Problem Possible Cause Corrective ActionTroubleshooting Replacement Parts SE-4200/4400 Inset aReplacement Parts SE-4200/4400 Part Description QtyWiring Diagram SE-4200/4400 Water Filtration System SE-4200/4400 Water Filtration System Limited Warranty

SE-4200/4400 specifications

The Antunes AJ SE-4200/4400 is a state-of-the-art food service equipment model specifically designed for commercial kitchens seeking efficiency, reliability, and precision in cooking. This versatile cooking solution offers operators the ability to prepare a wide range of menu items with unmatched speed and consistency, making it an ideal choice for fast-casual restaurants, hotels, and catering services.

One of the standout features of the Antunes AJ SE-4200/4400 is its advanced cooking technology. Utilizing a combination of radiant heat and high-velocity, impinged air, this model ensures that food is cooked evenly and thoroughly. The dual cooking technology significantly reduces cooking times while delivering superior product quality. This efficient cooking method not only streamlines kitchen operations but also enhances customer satisfaction by providing perfectly cooked meals in minimal time.

The design of the AJ SE-4200/4400 emphasizes user-friendliness, which is crucial in a bustling kitchen environment. Equipped with a digital touch control panel, operators can easily navigate cooking settings, adjust temperatures, and set timers for various menu items. This intuitive interface allows for quick training of staff, reducing learning curves and enabling seamless transitions between different team members.

In addition to its cooking capabilities, the Antunes AJ SE-4200/4400 is designed for easy maintenance. Its stainless steel construction not only ensures durability but also simplifies cleaning and sanitization, adhering to industry standards. The model is constructed with removable components, making it easier for staff to perform routine maintenance tasks without the need for specialized tools.

Another significant advantage of the Antunes AJ SE-4200/4400 is its versatility in cooking applications. Whether preparing sandwiches, pizzas, or other baked goods, this equipment is equipped to handle various food items with precision, enhancing menu flexibility and allowing for creativity in food presentation.

Energy efficiency is also a key consideration in modern food service equipment, and the AJ SE-4200/4400 does not disappoint. Its design is optimized to consume less energy while maintaining high performance levels, allowing operators to reduce operational costs and limit their environmental impact.

The Antunes AJ SE-4200/4400 represents the next step in commercial cooking technology, offering features that cater to the evolving needs of the food service industry. With its combination of innovative cooking methods, user-friendly controls, easy maintenance, and versatility in applications, this model stands out as a premier choice for operators looking to elevate their kitchen operations and delight their customers.
Top Page Image Contents