Antunes, AJ SE-4200/4400 Maintenance, Checking the Controller Program, Changing the Cartridges

Page 16

SE-4200/4400 WATER FILTRATION SYSTEM

MAINTENANCE

The SE-4200/4400 Filtration system is designed to require very little maintenance. To ensure that the water is of the highest quality, occasionally some ser- vice is required.

Checking the Controller Program

The program features and setting should be checked occasionally to confirm that the system is operating under the proper settings.

Follow the procedures outlined in the Operation section of this manual to check and set the controller settings.

Changing the Cartridges

While the filtration system is designed for long life, eventually the cartridges will need to be replaced.

.1 Open the faucet or tap closest downstream to the filtration system.

2.Press the Stop button or close the Inlet Water Valve and allow the system to depressurize.

3.Place a bucket under the filter cartridge to be changed. Using a strap wrench, loosen, but DO NOT remove the top and bottom End Caps.

4.Disconnect the Permeate Port connection.

5.Unscrew the cartridge End Caps from the car- tridge, slide the caps past the cartridge ends, and remove the old cartridge from the system.

6.Inset the new cartridge into the system

7.Attach the Permeate Port connection to the new cartridge.

8.Inspect the O-rings to make sure they are clean and are not splitting or cut. For all O-rings, make sure they are lubricated with an approved food grade lubricant acceptable for drinking water use.

9.For each End Cap, position the cartridge and cap and screw the cap to the cartridge. Tighten with strap wrench, if necessary.

10.Repeat this procedure for the other cartridge.

11.Follow the Flushing and Starting up the System and Sanitizing the System and Lines Procedures in the Installation section of this manual to com- plete the cartridge change.

SYSTEM SANITATION

Over time and use, the plumbing downstream from the system may require sanitization. It is recommended that the system and downstream plumbing be sani- tized at least once a year. When necessary, follow the Sanitizing the System and Lines procedure in the Installation section of this manual.

16

P/N 1010852 Rev. C 04/06

Image 16
Contents Water Filtration System Table of Contents Owner InformationImportant Safety Information Service/Technical AssistanceImportant Safety Information Specifications Specifications DimensionsInstallation Equipment SetupSuggested Tools and Supplies for Installation UnpackingInstallation Locating and Mounting the systemSE-4200/4400 Water Filtration System Filtration Process OperationOperating Controls Figure Function Button Programming OperationMessage Description SET Quickflush Mode Password. Leave the Demand Sensor option If you cannot remember your password, callTechnical Service immediately for assistance To off, the system will then display the DemandProper operation of the system. The password Flush, and feature settings from being changedUsing this function Function should only be used to protect the timeOperating the Unit Checking the Controller Program MaintenanceChanging the Cartridges Troubleshooting Problem Possible Cause Corrective ActionTroubleshooting Replacement Parts SE-4200/4400 Inset aReplacement Parts SE-4200/4400 Part Description QtyWiring Diagram SE-4200/4400 Water Filtration System SE-4200/4400 Water Filtration System Limited Warranty

SE-4200/4400 specifications

The Antunes AJ SE-4200/4400 is a state-of-the-art food service equipment model specifically designed for commercial kitchens seeking efficiency, reliability, and precision in cooking. This versatile cooking solution offers operators the ability to prepare a wide range of menu items with unmatched speed and consistency, making it an ideal choice for fast-casual restaurants, hotels, and catering services.

One of the standout features of the Antunes AJ SE-4200/4400 is its advanced cooking technology. Utilizing a combination of radiant heat and high-velocity, impinged air, this model ensures that food is cooked evenly and thoroughly. The dual cooking technology significantly reduces cooking times while delivering superior product quality. This efficient cooking method not only streamlines kitchen operations but also enhances customer satisfaction by providing perfectly cooked meals in minimal time.

The design of the AJ SE-4200/4400 emphasizes user-friendliness, which is crucial in a bustling kitchen environment. Equipped with a digital touch control panel, operators can easily navigate cooking settings, adjust temperatures, and set timers for various menu items. This intuitive interface allows for quick training of staff, reducing learning curves and enabling seamless transitions between different team members.

In addition to its cooking capabilities, the Antunes AJ SE-4200/4400 is designed for easy maintenance. Its stainless steel construction not only ensures durability but also simplifies cleaning and sanitization, adhering to industry standards. The model is constructed with removable components, making it easier for staff to perform routine maintenance tasks without the need for specialized tools.

Another significant advantage of the Antunes AJ SE-4200/4400 is its versatility in cooking applications. Whether preparing sandwiches, pizzas, or other baked goods, this equipment is equipped to handle various food items with precision, enhancing menu flexibility and allowing for creativity in food presentation.

Energy efficiency is also a key consideration in modern food service equipment, and the AJ SE-4200/4400 does not disappoint. Its design is optimized to consume less energy while maintaining high performance levels, allowing operators to reduce operational costs and limit their environmental impact.

The Antunes AJ SE-4200/4400 represents the next step in commercial cooking technology, offering features that cater to the evolving needs of the food service industry. With its combination of innovative cooking methods, user-friendly controls, easy maintenance, and versatility in applications, this model stands out as a premier choice for operators looking to elevate their kitchen operations and delight their customers.