Extron electronic RSF123, RSB129, RSB 126, RSU 126 Quick Start Guide SW USB Series, Step

Page 4

Quick Start Guide — SW USB Series

Follow these steps to set up and start using the SW USB switcher:

Step 1

Mount the SW USB on a rack shelf or under furniture, if desired. See “Mounting the SW USB Series Switcher”, in chapter 2, “Installation”, for mounting procedures.

Step 2

Connect host device(s) to one or more SW USB input connectors, using A to B type USB cable lengths of up to 15' (4.5 m).

Step 3

Connect one or more peripheral USB devices (such as a keyboard and/or mouse) to the USB Output Hub ports, using USB cable lengths of up to 15' (4.5 m).

If host emulation will be used (SW USB Plus only): Attach a standard keyboard and/or mouse to output port 3 and/or 4, and set the appropriate DIP switch(es) to on. (See “Host Emulation [SW4 USB Plus only],” in chapter 3, “Operation.”)

Step 4

If desired, connect an RS-232 cable to the SW USB’s RS-232 port and to a host computer or control system. (See “Wiring for RS-232 Communication,” in chapter 2, “Installation”.)

NYour RS-232 computer or control system should not be one of the host devices connected to any of the input ports. Use a separate computer for RS-232 communication.

Step 5

If desired, connect an external Extron A/V switcher to the RS-232 Pass Thru port. This switcher can then be controlled via commands sent through this port.

Step 6

If using RS-232 pass-through to control an A/V switcher, enter one of the following SIS™ (Simple Instruction Set) commands via your RS-232 interface to select a loop mode for issuing commands. (See “RS-232 Pass Thru port” in chapter 2, “Installation”.)

•E1LOOP}(Loop 1 mode [default]) — Lets you issue SIS commands to the SW USB via an RS-232 interface and/or pass them through to the A/V switcher.

•E0LOOP}(Loop 0 mode) — Lets you issue the input selection command X!! to the SW USB via contact closure, the SW USB front panel buttons, or the RS-232 interface, and to pass the command through the RS-232 Pass Thru port to the A/V switcher.

SW USB Series • Quick Start Guide QS-1

Page 3 Page 5
Image 4
Page 3 Page 5
Contents SW USB Series Precautions Extron’s Warranty安全须知 中文 FCC Class a NoticeQuick Start Guide SW USB Series StepTable of Contents Table of Contents, cont’d OneIntroduction SW USB SeriesFeatures IntroductionAbout this Manual About the SW USB SeriesIntroduction, cont’d Application Diagrams SW4 USBInstallation TwoSW USB Series Introduction, cont’dInstallation Installation OverviewMounting the SW USB Series Switcher Tabletop useRack mounting procedure Installation, cont’dFurniture mounting Rear Panel Features Preparing the SW USB for under-desk mountingSW2 USB rear panel SW4 USB rear panelWiring the Power Connector Power connector wiringInstallation, cont’d Wiring for RS-232 Communication RS-232 connector pin assignmentsRS-232 port RS-232 Pass Thru portConnecting Multiple SW USB Switchers in a System Controlling an Extron A/V switcher in Loop 0 modeContact Closure Control Connections for RS-232 loop-throughThree OperationFront Panel Features Powering on the switcherOperation OperationsSelecting an input using contact closure Selecting an input using SIS commandsMode SIS commands issued via SIS command to enable Loop SIS command processing in Loop 1 modeEnabling front panel lockout executive mode SW USB Function SW USB Response to Host CommandSending commands to an A/V switcher using contact closure Contact closure SIS command sent Function on SelectionResetting Setting executive modeSetting up for host emulation Host emulation SW4 USB Plus onlySIS Configuration and Control TroubleshootingFour Peripheral emulation SW4 USB Plus onlyHost-to-Switcher Communications SIS Configuration and ControlUsing the Command/Response Table Command/response table for SIS commands SIS Configuration and Control, cont’dSW USB Series SIS Configuration Downloading and installing the Firmware Loader SIS Configuration and Control, cont’d Updating the FirmwareDownloading and installing the SW USB firmware Loading the firmware to the SW USB using the Firmware Loader Problem solving Specifications, Part Numbers Accessories AAppendix aSpecifications, Part Numbers, Accessories SpecificationsOptional accessories AccessoriesMounting options Specifications, Part Numbers, Accessories, cont’d

SW USB Series, RSB 126, RSU 126, RSB129, RSF123 specifications

Extron Electronic is a well-known brand in the AV industry, renowned for its high-quality signal distribution, control systems, and mounting solutions. Among its impressive range of products, the RSB129, RSF123, RSU 126, RSB 126, and SW USB Series stand out due to their sophisticated features and technologies.

The RSB129 is a robust rack shelf designed to accommodate a variety of equipment, such as routers, switches, and other AV devices. This shelf can support up to 300 pounds, making it an excellent choice for heavy-duty applications. It also features adjustable mounting points that allow for flexible placement of devices, ensuring an organized and efficient setup.

The RSF123, on the other hand, is a flexible rack frame solution that provides a reliable mounting option for intermediate size equipment. This 2U rack frame is built to hold devices securely, while its front ventilation design aids in maintaining optimal temperature levels. The RSF123 is particularly popular for those looking to streamline their installations with a clean and professional aesthetic.

The RSU 126 is another versatile rack mount solution that focuses on aesthetic appeal while providing functionality. Designed for environments where aesthetics matter, the RSU 126 features a smooth, sleek design that integrates seamlessly into office and conference room settings. Its compact 2U size makes it suitable for various AV applications, while its durable build ensures long-lasting use.

The RSB 126 is similar in nature to the RSB129 but is crafted for smaller setups. This 1U rack shelf is ideal for less intensive applications but still boasts impressive weight support. It features a front lip that prevents equipment from sliding off, ensuring that devices are kept securely in place. The RSB 126 is perfect for studios, server rooms, or any location requiring a compact yet sturdy shelf.

Finally, the SW USB Series is a suite of USB products designed to streamline connectivity in modern AV installations. These USB devices offer flexible options for extending USB signals over long distances without loss of quality. They support a variety of USB protocols, making them compatible with numerous devices, from cameras to computers. The SW USB Series aims to simplify complex installations, ensuring a reliable connection in various environments.

In summary, Extron's RSB129, RSF123, RSU 126, RSB 126, and SW USB Series products cater to a variety of AV installation needs, combining durability, functionality, and aesthetics. Whether for heavy-duty rack shelving or streamlined USB connectivity, these products are designed to enhance any AV setup.
Top Page Image Contents