Extron electronic Complete Installation Guide for Extron SW USB Series Including RSB126 and RSU126 Models
Page 10

Installation

Installation Overview

To install and set up the SW USB switcher,

1Mount the switcher on a rack shelf or furniture, if desired.

2Connect host device(s) to one or more SW USB input connectors, using USB cable lengths of up to 15' (4.5 m).

3Connect one or more peripheral USB devices to the

SW USB Output Hub ports, using USB cable lengths of up to 15' (4.5 m).

4If desired, connect an RS-232 cable to the SW USB’s RS-232 port and to a host computer or control system. (See “Wiring for RS-232 Communication,” later in this chapter.)

NYour RS-232 computer or control system should not be one of the host devices connected to any of the input ports. Use a separate computer for RS-232 communication.

5If desired, connect an external Extron A/V switcher to the RS-232 Pass Thru port. This switcher can then be controlled via commands sent through this port.

6If desired, wire one of the provided three-pole captive screw plugs to a 2-button or 4-button contact closure device, and connect the device to the SW USB’s Contact port. (See “Contact Closure Control,” later in this chapter.”)

7If using a different power supply from the one that was provided, wire the provided two-pin captive screw connector to the external power supply. (See “Wiring the Power Connector,” later in this chapter.)

8(SW4 USB Plus only) If desired, attach a keyboard and/or mouse to output port 3 and/or 4, and set the appropriate DIP switch(es) for host emulation. (See “Host emulation (SW4 USB Plus only),” in chapter 3, “Operation.”

9Power on the USB peripheral devices, if applicable.

10Power on the SW USB switcher.

11Power on the host device(s).

Mounting the SW USB Series Switcher

The SW USB Series switcher can be set on a table, mounted on a rack shelf, or mounted under a desk, podium, or table.

Tabletop use

Four adhesive rubber feet are included with the SW USB switcher. For tabletop use, attach one foot at each corner on the bottom of the unit, and place the switcher in the desired location.

Rack mounting

For optional rack mounting, do not install the rubber feet. Mount the switcher on any of the following rack shelves:

•RSB 123 — 1U, 3.5" Deep VersaTools® Basic Rack Shelf (part #60-604-20)

•RSF 123 — 1U, 3.5" Deep VersaTools Rack Shelf Kit (part #60-190-20)

•RSB 126 — 1U, 6" Deep Basic Rack Shelf (part #60-604-10)

•RSU 126 — 1U, 6" Deep Universal Rack Shelf Kit (part #60-190-10)

•RSB 129 — 1U, 9.5" Deep Basic Rack Shelf (part #60-604-01)

•RSU 129 — 1U, 9.5" Deep Universal Rack Shelf Kit (part #60-190-01)

UL rack mounting guidelines

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the equipment in a rack.

1. Elevated operating ambient temperature — If the equipment is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the equipment in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.

2. Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — When mounting the equipment in the rack, ensure that uneven mechanical loading does not cause a hazardous condition.

2-2

SW USB Series • Installation

SW USB Series • Installation

2-3

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SW USB Series Precautions Extron’s Warranty安全须知 中文 FCC Class a NoticeQuick Start Guide SW USB Series StepTable of Contents Introduction Table of Contents, cont’dOne SW USB SeriesAbout this Manual FeaturesIntroduction About the SW USB SeriesIntroduction, cont’d Application Diagrams SW4 USBSW USB Series InstallationTwo Introduction, cont’dMounting the SW USB Series Switcher InstallationInstallation Overview Tabletop useRack mounting procedure Installation, cont’dFurniture mounting SW2 USB rear panel Rear Panel FeaturesPreparing the SW USB for under-desk mounting SW4 USB rear panelWiring the Power Connector Power connector wiringRS-232 port Installation, cont’d Wiring for RS-232 CommunicationRS-232 connector pin assignments RS-232 Pass Thru portContact Closure Control Connecting Multiple SW USB Switchers in a SystemControlling an Extron A/V switcher in Loop 0 mode Connections for RS-232 loop-throughThree OperationOperation Front Panel FeaturesPowering on the switcher OperationsMode SIS commands issued via SIS command to enable Loop Selecting an input using contact closureSelecting an input using SIS commands SIS command processing in Loop 1 modeSending commands to an A/V switcher using contact closure Enabling front panel lockout executive modeSW USB Function SW USB Response to Host Command Contact closure SIS command sent Function on SelectionSetting up for host emulation ResettingSetting executive mode Host emulation SW4 USB Plus onlyFour SIS Configuration and ControlTroubleshooting Peripheral emulation SW4 USB Plus onlyHost-to-Switcher Communications SIS Configuration and ControlUsing the Command/Response Table Command/response table for SIS commands SIS Configuration and Control, cont’dSW USB Series SIS Configuration Downloading and installing the Firmware Loader SIS Configuration and Control, cont’d Updating the FirmwareDownloading and installing the SW USB firmware Loading the firmware to the SW USB using the Firmware Loader Problem solving Specifications, Part Numbers Accessories AAppendix aSpecifications, Part Numbers, Accessories SpecificationsOptional accessories AccessoriesMounting options Specifications, Part Numbers, Accessories, cont’d

SW USB Series, RSB 126, RSU 126, RSB129, RSF123 specifications

Extron Electronic is a well-known brand in the AV industry, renowned for its high-quality signal distribution, control systems, and mounting solutions. Among its impressive range of products, the RSB129, RSF123, RSU 126, RSB 126, and SW USB Series stand out due to their sophisticated features and technologies.

The RSB129 is a robust rack shelf designed to accommodate a variety of equipment, such as routers, switches, and other AV devices. This shelf can support up to 300 pounds, making it an excellent choice for heavy-duty applications. It also features adjustable mounting points that allow for flexible placement of devices, ensuring an organized and efficient setup.

The RSF123, on the other hand, is a flexible rack frame solution that provides a reliable mounting option for intermediate size equipment. This 2U rack frame is built to hold devices securely, while its front ventilation design aids in maintaining optimal temperature levels. The RSF123 is particularly popular for those looking to streamline their installations with a clean and professional aesthetic.

The RSU 126 is another versatile rack mount solution that focuses on aesthetic appeal while providing functionality. Designed for environments where aesthetics matter, the RSU 126 features a smooth, sleek design that integrates seamlessly into office and conference room settings. Its compact 2U size makes it suitable for various AV applications, while its durable build ensures long-lasting use.

The RSB 126 is similar in nature to the RSB129 but is crafted for smaller setups. This 1U rack shelf is ideal for less intensive applications but still boasts impressive weight support. It features a front lip that prevents equipment from sliding off, ensuring that devices are kept securely in place. The RSB 126 is perfect for studios, server rooms, or any location requiring a compact yet sturdy shelf.

Finally, the SW USB Series is a suite of USB products designed to streamline connectivity in modern AV installations. These USB devices offer flexible options for extending USB signals over long distances without loss of quality. They support a variety of USB protocols, making them compatible with numerous devices, from cameras to computers. The SW USB Series aims to simplify complex installations, ensuring a reliable connection in various environments.

In summary, Extron's RSB129, RSF123, RSU 126, RSB 126, and SW USB Series products cater to a variety of AV installation needs, combining durability, functionality, and aesthetics. Whether for heavy-duty rack shelving or streamlined USB connectivity, these products are designed to enhance any AV setup.
Top Page Image Contents