(3) Filling
①Determine the filling quantity first according to the freezer being repaired. (Each small mark of the liquid tube is 25g, each big mark is 100g).
②Open all related valves.
③When the liquid level has reached filling quantity, close valves.
(4) Test run
①After filling, turn on power to freezer for test run. Observe the unit operation.
②Switch off power.
12.6 Freezer noise
12.6.1 Freezer noise sources
Freezer noise comes from the expanding with heat and contracting with cold of compressor, evaporator or condenser; from the contacting or resonance of pipes; from the flowing of refrigerant; or from the vibration of freezer because the floor is not level, etc.
MAINTENANCE SERVICE AND TROUBLE SHOOTING
Maintenance Service and Trouble Shooting
12.6.2 Compressor
３９
PDF created with pdfFactory trial version www.pdffactory.com