Extron electronic manual Connecting the QGE 100 to the Network, Connection Procedure

Page 18

2.Plug the DVI-A connector of the adapter into the QGE DVI-I Out port.

Analog Monitor

 

 

 

 

 

Analog to DVI

 

 

 

 

 

Adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To QGE 100

DVI I Out Port

Figure 8. Connecting the Monitor of an Analog Source Computer to the

Analog to DVI Adapter

NOTE: If you use a monitor cable or adapter other than the one provided with

the QGE 100, ensure that all pins are properly interconnected; otherwise,

the computer graphics card or monitor may not operate correctly.

Connecting the QGE 100 to the Network

Source content that is captured by the QGE 100 from a source computer is transmitted to a viewing device via TCP/IP over an Ethernet network.

Connection Procedure

Connect the QGE to your network as follows:

1.Connect a standard straight-through Ethernet patch cable (not supplied) between the LAN port on the QGE 100 rear panel to a switch or router that is connected to the same network as your viewing device. (A shielded twisted pair cable is recommended for this connection.) The network port on the router or switch must be capable of supporting a 100BASE-T connection.

Pins:

12345678

Insert Twisted

Pair Wires

RJ-45

Connector

Straight-through Cable

Pin

End 1

End 2

 

Function

 

Wire Color

Wire Color

 

 

 

 

 

 

1

White-orange

White-orange

 

TD+ (+ data transmit)

 

 

 

 

 

2

Orange

Orange

 

TD- (- data transmit)

 

 

 

 

 

3

White-green

White-green

 

RD+ (+ data receive)

 

 

 

 

 

4

Blue

Blue

 

NC

 

 

 

 

 

5

White-blue

White-blue

 

NC

 

 

 

 

 

6

Green

Green

 

RD- (- data receive)

7

White-brown

White-brown

 

NC

8

Brown

Brown

 

NC

 

T568B

T568B

 

 

A cable that is wired the same at both ends is called a "straight-through" cable, because no pin or pair assignments are swapped.

Figure 9. RJ-45 Connector Wiring

QGE 100 • Installation and Maintenance

12

Page 17 Page 19
Image 18
Page 17 Page 19
Contents QGE Safety Instructions English FCC Class a Notice Software Commands Conventions Used in this GuideNotifications Contents QGE 100 Contents About this Guide About the QGE 100 EncoderQGE 100 Software Single or Multiple UsersImage Capture and Distribution FeaturesFunctional Overview QGE 100 Data StreamManaging the Network Operating SystemEdid Management QGE 100 connected with a local monitorQGE 100 connected with no local monitor Supported Source Formats Digital and Analog RepresentationApplication Diagrams Multicast StreamingInstallation Operation Installation OverviewRear Panel Features QGE 100 Rear PanelConnecting the Source Computer to the QGE Pin FunctionAnalog Monitor Cable with Ferrite For an analog source computerConnecting the QGE 100 to the Network Connection ProcedureConnecting Power to the Unit Ethernet Connection IndicatorsConnection Diagrams If mounting the QGE 100 on a rackDigital Source Connection Diagram Connections with a Digital SourceAnalog Connection Diagram Connections with an Analog SourceFront Panel Features QGE 100 Front PanelAccessing the Software Programs Computer System RequirementsUsing the QGE 100 Administrator Program Installing the SoftwareStarting the Administrator Program QGE 100 Administrator Main Application Window Tasks sectionQGE 100 List section Option Description Configure QGE 100 Properties sectionMenu bar Recent connectionsOther QGE 100 window items Tools menuAdministrator Viewer window Viewing a QGE 100 SourceAdministrator Viewer menu Options Menu Option Toolbar Icon DescriptionSaving the list Managing the QGE 100 ListRefreshing the list Adding QGEs to the listDeleting a QGE from the list Deleting the QGE 100 ListLoading a saved QGE 100 List Logging In and Out Administrator Level Changing the PasswordConfiguring a QGE Configuring performance settingsConfiguring network settings Network Settings Window Setting DescriptionConfiguring UDP multicast settings Network Settings Section for UDP Multicast ConfigurationConfiguring the QGE for Use with a Quantum Elite Processor Detect Quantum Sources WindowQGE 100 Software Configuration and Control Using the QGE 100 Viewer Program Starting the Viewer ProgramQGE 100 Viewer Window PortRecent Menus and toolbarOption Toolbar Icon Description ConnectionsView menu Connecting to a QGE 100 Source Connecting using the Channel listDisconnecting from a QGE Connecting using the Connect dialog boxConnecting to a QGE 100 on another subnet Refreshing the Channel ListLearning Dialogs Learning Dialog ExampleConfiguring keyboard and mouse control options Mouse and Keyboard Control of the Source ComputerEnabling Mouse and Keyboard Control Field To enter a value From the Special Context menuStarting and stopping a mouse and keyboard control session To end the current control session, do any of the followingMulticast Error Logging Using the Special Context menuVideo processing SpecificationsVideo input SyncGeneral IP, TCP, UDP, DhcpIncluded Parts Replacement Part Number Part Numbers and AccessoriesOptional Accessories Accessories Part NumberUL Guidelines for Rack Mounting Power supplyMounting the QGE 100 Encoder Other Rack Mounting RequirementsChoosing IP Addresses What is an IP Address?IP Addressing Class Name Valid Address Range Identifier ArrangementPing to determine the Extron IP address Subnet MaskPinging for the IP Address Class Name Subnet MaskGateways Subnetting, a PrimerPinging to determine the web IP address Local and remote devicesDetermining whether devices are on the same subnet IP addresses and octetsSubnet masks and octets Unmasked octets are compared indicated by ? in figureThings that Impact Performance Criteria Troubleshooting PerformancePerformance Criteria Data stream bottlenecksSource scaling Optimizing the Encoder Parameters Asia Middle East USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Europe
Related manuals
Manual 4 pages 54.09 Kb

QGE 100 specifications

The Extron QGE 100 is a high-performance network switch engineered specifically for AV system integration. With its advanced capabilities, this device plays a crucial role in managing AV data traffic, ensuring reliable performance and efficiency in various settings such as corporate environments, educational institutions, and healthcare facilities.

One of the key features of the QGE 100 is its support for Power over Ethernet (PoE). This allows the switch to deliver both data and power to connected devices over a single Ethernet cable, simplifying installations and reducing the need for additional power sources. This is particularly beneficial for devices like IP cameras, wireless access points, and AV devices in scenarios where accessibility to power outlets may be limited.

The QGE 100 also provides a robust Layer 2 switching functionality, which is essential for managing data flow within the network. Its capability to handle multiple VLANs ensures that AV traffic can be segregated effectively, thus improving network performance and security. The switch features IGMP Snooping, a protocol that optimizes multicast traffic management, ensuring that video streams reach the intended recipients without unnecessary bandwidth consumption.

In terms of connectivity, the Extron QGE 100 is equipped with multiple Gigabit Ethernet ports, facilitating high-speed data transmission for AV content. The switch's user-friendly management interface allows for straightforward configuration, monitoring, and troubleshooting, streamlining operations across AV environments. Additionally, it supports link aggregation, enhancing bandwidth and redundancy when connecting multiple devices.

The QGE 100 is also designed with reliability in mind, featuring a fanless operation that minimizes noise and ensures a long lifespan. Its compact form factor allows for easy rack mounting in equipment racks, maintaining a clean and organized setup.

Another vital characteristic of the QGE 100 is its compatibility with Extron's comprehensive suite of AV control and management products. This integration capability provides users with a cohesive solution for managing their AV systems, further enhancing the overall user experience.

In conclusion, the Extron QGE 100 network switch is an essential tool for any AV system requiring efficient connectivity, power delivery, and data management. Its sophisticated features and technologies make it a valuable asset in modern AV installations, ensuring robust performance and ease of use.
Top Page Image Contents