Extron electronic QGE 100 manual Connecting Power to the Unit, Ethernet Connection Indicators

Page 19

2.When the QGE 100 encoder is delivered, the following default addresses are set for it:

•IP address: 172.28.231.98

•Subnet mask: 255.255.000.000

If you need to change these addresses, use the QGE 100 Administrator software to enter new addresses (see the “Software Configuration and Control” section for detailed procedures). The IP address must be within the range of addresses that have been specified for your network and cannot be in use by another network device. The subnet mask must also be correct.

NOTE: The IP address and subnet mask are required parameters for the QGE to

be on the network. Optional parameters that can be changed using the

Administrator software include Device Name, DNS Server Address, WINS

Server Address, and Default Gateway.

Ethernet Connection Indicators

After the Ethernet connection has been made, the green and amber LEDs at the bottom of the LAN port indicate the status of the connection:

•The green (link) LED indicates that the QGE is properly connected to an Ethernet LAN. This LED should light steadily.

•The amber (activity) LED indicates transmission of data on the RJ-45 connector. This

LED should flicker as the QGE communicates.

Connecting Power to the Unit

Powering up is the last step in the QGE 100 setup procedure. Always ensure that the QGE 100 is powered up before the source computer. If you power on the QGE after the source computer, the computer may not correctly detect the mouse, keyboard, and monitor.

To connect power to the unit:

1.Plug the mini DIN connector of the provided 12 VDC power supply into the rear panel mini DIN connector labeled “12V DC In.”

2.Connect the provided power cord between the IEC connector of the power supply and an AC outlet.

NOTE: The QGE 100 power supply is double-insulated and does not require an earth

to ground connection.

QGE 100 • Installation and Maintenance

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents QGE Safety Instructions English FCC Class a Notice Conventions Used in this Guide Software CommandsNotifications Contents QGE 100 Contents About the QGE 100 Encoder About this GuideSingle or Multiple Users QGE 100 SoftwareQGE 100 Data Stream FeaturesFunctional Overview Image Capture and DistributionOperating System Managing the NetworkQGE 100 connected with a local monitor Edid ManagementQGE 100 connected with no local monitor Digital and Analog Representation Supported Source FormatsMulticast Streaming Application DiagramsInstallation Overview Installation OperationQGE 100 Rear Panel Rear Panel FeaturesPin Function Connecting the Source Computer to the QGEFor an analog source computer Analog Monitor Cable with FerriteConnection Procedure Connecting the QGE 100 to the NetworkEthernet Connection Indicators Connecting Power to the UnitIf mounting the QGE 100 on a rack Connection DiagramsConnections with a Digital Source Digital Source Connection DiagramConnections with an Analog Source Analog Connection DiagramQGE 100 Front Panel Front Panel FeaturesComputer System Requirements Accessing the Software ProgramsInstalling the Software Using the QGE 100 Administrator ProgramStarting the Administrator Program Tasks section QGE 100 Administrator Main Application WindowQGE 100 List section Recent connections Configure QGE 100 Properties sectionMenu bar Option DescriptionTools menu Other QGE 100 window itemsViewing a QGE 100 Source Administrator Viewer windowMenu Option Toolbar Icon Description Administrator Viewer menu OptionsAdding QGEs to the list Managing the QGE 100 ListRefreshing the list Saving the listDeleting the QGE 100 List Deleting a QGE from the listLoading a saved QGE 100 List Changing the Password Logging In and Out Administrator LevelConfiguring performance settings Configuring a QGEConfiguring network settings Setting Description Network Settings WindowNetwork Settings Section for UDP Multicast Configuration Configuring UDP multicast settingsDetect Quantum Sources Window Configuring the QGE for Use with a Quantum Elite ProcessorQGE 100 Software Configuration and Control Starting the Viewer Program Using the QGE 100 Viewer ProgramPort QGE 100 Viewer WindowConnections Menus and toolbarOption Toolbar Icon Description RecentView menu Connecting using the Channel list Connecting to a QGE 100 SourceRefreshing the Channel List Connecting using the Connect dialog boxConnecting to a QGE 100 on another subnet Disconnecting from a QGELearning Dialog Example Learning DialogsMouse and Keyboard Control of the Source Computer Configuring keyboard and mouse control optionsEnabling Mouse and Keyboard Control From the Special Context menu Field To enter a valueTo end the current control session, do any of the following Starting and stopping a mouse and keyboard control sessionUsing the Special Context menu Multicast Error LoggingSync SpecificationsVideo input Video processingIP, TCP, UDP, Dhcp GeneralAccessories Part Number Part Numbers and AccessoriesOptional Accessories Included Parts Replacement Part NumberOther Rack Mounting Requirements Power supplyMounting the QGE 100 Encoder UL Guidelines for Rack MountingClass Name Valid Address Range Identifier Arrangement What is an IP Address?IP Addressing Choosing IP AddressesClass Name Subnet Mask Subnet MaskPinging for the IP Address Ping to determine the Extron IP addressLocal and remote devices Subnetting, a PrimerPinging to determine the web IP address GatewaysUnmasked octets are compared indicated by ? in figure IP addresses and octetsSubnet masks and octets Determining whether devices are on the same subnetData stream bottlenecks Troubleshooting PerformancePerformance Criteria Things that Impact Performance CriteriaSource scaling Optimizing the Encoder Parameters Europe USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Asia Middle East
Related manuals
Manual 4 pages 54.09 Kb

QGE 100 specifications

The Extron QGE 100 is a high-performance network switch engineered specifically for AV system integration. With its advanced capabilities, this device plays a crucial role in managing AV data traffic, ensuring reliable performance and efficiency in various settings such as corporate environments, educational institutions, and healthcare facilities.

One of the key features of the QGE 100 is its support for Power over Ethernet (PoE). This allows the switch to deliver both data and power to connected devices over a single Ethernet cable, simplifying installations and reducing the need for additional power sources. This is particularly beneficial for devices like IP cameras, wireless access points, and AV devices in scenarios where accessibility to power outlets may be limited.

The QGE 100 also provides a robust Layer 2 switching functionality, which is essential for managing data flow within the network. Its capability to handle multiple VLANs ensures that AV traffic can be segregated effectively, thus improving network performance and security. The switch features IGMP Snooping, a protocol that optimizes multicast traffic management, ensuring that video streams reach the intended recipients without unnecessary bandwidth consumption.

In terms of connectivity, the Extron QGE 100 is equipped with multiple Gigabit Ethernet ports, facilitating high-speed data transmission for AV content. The switch's user-friendly management interface allows for straightforward configuration, monitoring, and troubleshooting, streamlining operations across AV environments. Additionally, it supports link aggregation, enhancing bandwidth and redundancy when connecting multiple devices.

The QGE 100 is also designed with reliability in mind, featuring a fanless operation that minimizes noise and ensures a long lifespan. Its compact form factor allows for easy rack mounting in equipment racks, maintaining a clean and organized setup.

Another vital characteristic of the QGE 100 is its compatibility with Extron's comprehensive suite of AV control and management products. This integration capability provides users with a cohesive solution for managing their AV systems, further enhancing the overall user experience.

In conclusion, the Extron QGE 100 network switch is an essential tool for any AV system requiring efficient connectivity, power delivery, and data management. Its sophisticated features and technologies make it a valuable asset in modern AV installations, ensuring robust performance and ease of use.
Top Page Image Contents