Extron electronic QGE 100 manual Specifications, Video input, Video processing, Sync

Page 51

Reference

Information

This section contains reference information about the QGE 100. Topics that are covered include:

Specifications

Part Numbers and Accessories

Mounting the QGE 100 Encoder

IP Addressing

Troubleshooting Performance

Specifications

 

Video input

 

Number/signal type

1 analog VGA-UXGA or digital VGA-WUXGA VGA-WUXGA RGBHV, RGBS,

 

RGsB, single link DVI input

 

1 analog or digital loop-through

Connectors

2 female DVI-I

Impedance

75 ohms

Horizontal frequency

31.4 kHz to 100 kHz

Vertical frequency

50 Hz to 85 Hz

Resolution range

640x480 to 1920x1200*

 

*1920x1200 is accepted for DVI single link, reduced blanking only

Formats

RGBHV, RGBS, RGsB, digital video

Standards

DVI 1.0

Video processing

 

Maximum pixel clock

165 MHz

Digital sampling

24 bit, 8 bits per color, 165 MHz standard

Colors

16.78 million

Sync

 

Input type

RGBHV, RGBS, RGsB

Input level

2.75 V to 5.0 Vp-p for RGBHV

 

0.3 Vp-p for RGsB

Impedance

2.2k ohms for H and V

Max. input voltage

5 Vp-p

Polarity

Positive or negative

Control/remote — processor/encoder

Serial host control ports

2

RS-232, rear panel 9-pin male D connectors (not used)

Keyboard/mouse ports

2

PS/2 mouse ports (female 6-pin mini DIN): 1 input, 1 loop through

 

2

PS/2 keyboard ports (female 6-pin mini DIN): 1 input, 1 loop through

Ethernet ports

1 female RJ-45 connector

QGE 100 Series Videowall ProcessingQGE100Systems• Reference• HTMLInformationOperation 45

Image 51
Contents QGE Safety Instructions English FCC Class a Notice Software Commands Conventions Used in this GuideNotifications Contents QGE 100 Contents About the QGE 100 Encoder About this GuideSingle or Multiple Users QGE 100 SoftwareQGE 100 Data Stream FeaturesFunctional Overview Image Capture and DistributionOperating System Managing the NetworkEdid Management QGE 100 connected with a local monitorQGE 100 connected with no local monitor Digital and Analog Representation Supported Source FormatsMulticast Streaming Application DiagramsInstallation Overview Installation OperationQGE 100 Rear Panel Rear Panel FeaturesPin Function Connecting the Source Computer to the QGEFor an analog source computer Analog Monitor Cable with FerriteConnection Procedure Connecting the QGE 100 to the NetworkEthernet Connection Indicators Connecting Power to the UnitIf mounting the QGE 100 on a rack Connection DiagramsConnections with a Digital Source Digital Source Connection DiagramConnections with an Analog Source Analog Connection DiagramQGE 100 Front Panel Front Panel FeaturesComputer System Requirements Accessing the Software ProgramsUsing the QGE 100 Administrator Program Installing the SoftwareStarting the Administrator Program Tasks section QGE 100 Administrator Main Application WindowQGE 100 List section Recent connections Configure QGE 100 Properties sectionMenu bar Option DescriptionTools menu Other QGE 100 window itemsViewing a QGE 100 Source Administrator Viewer windowMenu Option Toolbar Icon Description Administrator Viewer menu OptionsAdding QGEs to the list Managing the QGE 100 ListRefreshing the list Saving the listDeleting a QGE from the list Deleting the QGE 100 ListLoading a saved QGE 100 List Changing the Password Logging In and Out Administrator LevelConfiguring a QGE Configuring performance settingsConfiguring network settings Setting Description Network Settings WindowNetwork Settings Section for UDP Multicast Configuration Configuring UDP multicast settingsDetect Quantum Sources Window Configuring the QGE for Use with a Quantum Elite ProcessorQGE 100 Software Configuration and Control Starting the Viewer Program Using the QGE 100 Viewer ProgramPort QGE 100 Viewer WindowConnections Menus and toolbarOption Toolbar Icon Description RecentView menu Connecting using the Channel list Connecting to a QGE 100 SourceRefreshing the Channel List Connecting using the Connect dialog boxConnecting to a QGE 100 on another subnet Disconnecting from a QGELearning Dialog Example Learning DialogsConfiguring keyboard and mouse control options Mouse and Keyboard Control of the Source ComputerEnabling Mouse and Keyboard Control From the Special Context menu Field To enter a valueTo end the current control session, do any of the following Starting and stopping a mouse and keyboard control sessionUsing the Special Context menu Multicast Error LoggingSync SpecificationsVideo input Video processingIP, TCP, UDP, Dhcp GeneralAccessories Part Number Part Numbers and AccessoriesOptional Accessories Included Parts Replacement Part NumberOther Rack Mounting Requirements Power supplyMounting the QGE 100 Encoder UL Guidelines for Rack MountingClass Name Valid Address Range Identifier Arrangement What is an IP Address?IP Addressing Choosing IP AddressesClass Name Subnet Mask Subnet MaskPinging for the IP Address Ping to determine the Extron IP addressLocal and remote devices Subnetting, a PrimerPinging to determine the web IP address GatewaysUnmasked octets are compared indicated by ? in figure IP addresses and octetsSubnet masks and octets Determining whether devices are on the same subnetData stream bottlenecks Troubleshooting PerformancePerformance Criteria Things that Impact Performance CriteriaSource scaling Optimizing the Encoder Parameters Europe USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Asia Middle East
Related manuals
Manual 4 pages 54.09 Kb

QGE 100 specifications

The Extron QGE 100 is a high-performance network switch engineered specifically for AV system integration. With its advanced capabilities, this device plays a crucial role in managing AV data traffic, ensuring reliable performance and efficiency in various settings such as corporate environments, educational institutions, and healthcare facilities.

One of the key features of the QGE 100 is its support for Power over Ethernet (PoE). This allows the switch to deliver both data and power to connected devices over a single Ethernet cable, simplifying installations and reducing the need for additional power sources. This is particularly beneficial for devices like IP cameras, wireless access points, and AV devices in scenarios where accessibility to power outlets may be limited.

The QGE 100 also provides a robust Layer 2 switching functionality, which is essential for managing data flow within the network. Its capability to handle multiple VLANs ensures that AV traffic can be segregated effectively, thus improving network performance and security. The switch features IGMP Snooping, a protocol that optimizes multicast traffic management, ensuring that video streams reach the intended recipients without unnecessary bandwidth consumption.

In terms of connectivity, the Extron QGE 100 is equipped with multiple Gigabit Ethernet ports, facilitating high-speed data transmission for AV content. The switch's user-friendly management interface allows for straightforward configuration, monitoring, and troubleshooting, streamlining operations across AV environments. Additionally, it supports link aggregation, enhancing bandwidth and redundancy when connecting multiple devices.

The QGE 100 is also designed with reliability in mind, featuring a fanless operation that minimizes noise and ensures a long lifespan. Its compact form factor allows for easy rack mounting in equipment racks, maintaining a clean and organized setup.

Another vital characteristic of the QGE 100 is its compatibility with Extron's comprehensive suite of AV control and management products. This integration capability provides users with a cohesive solution for managing their AV systems, further enhancing the overall user experience.

In conclusion, the Extron QGE 100 network switch is an essential tool for any AV system requiring efficient connectivity, power delivery, and data management. Its sophisticated features and technologies make it a valuable asset in modern AV installations, ensuring robust performance and ease of use.