Henny Penny SCR-6/8 technical manual Limited Warranty for Henny Penny Equipment

Page 35

SCR-6/8

LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT

Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original purchaser only for Henny Penny appliances and replacement parts:

NEW EQUIPMENT: Any part of a new appliance, except baskets, lamps, and fuses, which proves to be defective in material or workmanship within two (2) years from date of original installation, will be repaired or replaced without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor. Baskets will be repaired or replaced for ninety (90) days from date of original installation. Lamps and fuses are not covered under this LimitedWarranty. To validate this warranty, the registration card for the appliance must be mailed to Henny Penny within ten (10) days after installation.

FILTER SYSTEM: Failure of any parts within a fryer filter system caused by the use of the non-OEM filters or other unapproved filters is not covered under this Limited Warranty.

REPLACEMENT PARTS: Any appliance replacement part, except lamps and fuses, which proves to be defective in material or workmanship within ninety (90) days from date of original installation will be repaired or replaced without charge F.O.B. factory, Eaton, Ohio, or F.O.B. authorized distributor.

The warranty for new equipment covers the repair or replacement of the defective part and includes labor charges and maximum mileage charges of 200 miles round trip for a period of one (1) year from the date of original installation.

The warranty for replacement parts covers only the repair or replacement of the defective part and does not include any labor charges for the removal and installation of any parts, travel, or other expenses incidental to the repair or replacementof a part.

EXTENDED FRYPOT WARRANTY: Henny Penny will replace any frypot that fails due to manufacturing or workmanship issues for a period of up to seven (7) years from date of manufacture. This warranty shall not cover any frypot that fails dueto any misuse or abuse, such as heating of the frypot without shortening.

0 TO 3 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues will be replaced at no charge for parts, labor, or freight. Henny Penny will either install a new frypot at no cost or provide a new or reconditioned replacement fryer at no cost.

3 TO 7 YEARS: During this time, any frypot that fails due to manufacturing or workmanship issues will be replaced at no charge for the frypot only. Any freight charges and labor costs to install the new frypot as well as the cost of any other parts replaced, such as insulation, thermal sensors, high limits, fittings, and hardware, will be the responsibility of the owner.

Any claim must be presented to either Henny Penny or the distributor from whom the appliance was purchased. No allowance will be granted for repairs made by anyone else without Henny Penny’s written consent. If damage occurs during shipping, notify the sender at once so that a claim may be filed.

THEABOVE LIMITEDWARRANTY SETS FORTH THE SOLE REMEDYAGAINST HENNYPENNYFORANY BREACH OF WARRANTY OR OTHERTERM. BUYERAGREES THAT NO OTHER REMEDY (INCLUDING CLAIMS FORANY INCI- DENTAL OR CONSEQUENTIAL DAMAGES) SHALL BEAVAILABLE.

The above limited warranty does not apply (a) to damage resulting from accident, alteration, misuse, or abuse; (b) if the equipment’s serial number is removed or defaced; or (c) for lamps and fuses. THE ABOVE LIMITED WARRANTY IS EX-

PRESSLY IN LIEU OFALL OTHERWARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITYAND FIT- NESS,ANDALL OTHERWARRANTIESARE EXCLUDED. HENNY PENNYNEITHERASSUMES NORAUTHORIZESANY PERSON TOASSUME FOR ITANY OTHER OBLIGATION OR LIABILITY.

Revised 01/01/07

207

2-27

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Technical Manual Page Table of Contents 803 Which, if not avoided, could result in death or serious SafetyTroubleshooting IntroductionTroubleshooting Problem Cause Correction Error Code Cause Correction This Intentionally Left Blank Light bulbs and surrounding surfaces may be hot Power switch to OFF and disconnect main circuitTo avoid electrical shock or property damage, move Breaker, or unplug cord at wall receptacleRemove electrical power to unit Blower ReplacementThermal Sensor Replacement Results ContactorTest Points Results Drive Motor Replacement KITReplacement ContactorRotation Control Switch Drive Motor Replacement KITReplace side panel and restore power Rotation Control SwitchMent Drive Motor Capacitor Replace Ment Blower MotorCapacitor Replace Door Sensor Remove electrical power supplied to unitSocket Halogen Lamp Power SwitchRadiant Heaters Meat Probe Receptacle Replacement Control Board Speaker ReplacementRelays Control Board Replacement503 High Limit High Limit Wiring Diagrams Wiring Diagrams SN CA0610019 & Above SCR-6 Wiring Diagrams SN CA0610019 & Above SCR-6 SCR-6/8 1204 International wiring diagram SN CA0610019 & Above SCR-6 SN CB0610033 & Above SCR-8 SN CA0610018 & Below SCR-6 SN CB0610032 & Below SCR-8 SN CA0610019 & Above SCR-6 Limited Warranty for Henny Penny Equipment Page Parts Information QTY RH Disc Assy Complete SCR-6 Heaters and Bulbs SCR-8 SCR-6 PartQTY DescriptionControls and Doors 1210 Item NO. Part no Description SCR-8 Short and Tall Units Special Parts SCR-8Drive Motor Item no DescriptionElectrical Components 307 For Michigan units w/o hoods Item no Description SCR-8 SCR-6High Limit Switches and Blower 204 High Limit Switchesand Blower QTY. QTY. SCR-8 SCR-6 Item NO. Part no Description SCR-8 SCR-6

SCR-6/8 specifications

The Henny Penny SCR-6/8 is a cutting-edge commercial pressure fryer designed for efficiency, performance, and versatility in high-demand kitchen environments. Renowned for its exceptional cooking capabilities, this unit is suitable for frying a variety of foods, including chicken, fries, and onion rings, making it a popular choice for restaurants, catering services, and food trucks.

One of the key features of the SCR-6/8 is its high-capacity fry pot, available in both 6 and 8-gallon configurations. This design allows for increased production without sacrificing quality, enabling operators to serve large volumes of food quickly. With its patented SmartControl technology, the fryer ensures precise temperature regulation, significantly reducing oil volatility and guaranteeing consistent cooking results. The digital control panel provides intuitive access to cooking times, temperatures, and safety features, allowing for easy operation even for novice staff.

Another standout characteristic of the Henny Penny SCR-6/8 is its EcoStar oil filtration system. This innovative technology extends the life of cooking oil, reducing waste and operational costs. The automatic filtration system can be activated with a simple press of a button, allowing for quick filtration cycles during busy service times. This not only enhances food quality but also improves the overall oil management process, ensuring that fried products maintain their crispiness and flavor.

The SCR-6/8 is equipped with advanced safety features, including an automatic lid that prevents accidental opening during cooking and an over-temperature shut-off function that protects both the operator and the equipment. The fryer’s robust construction—crafted from high-quality stainless steel—not only provides durability but also ensures easy cleaning and maintenance. The design incorporates smooth surfaces and rounded corners to minimize buildup of grease and food particles, making sanitation effortless.

In terms of energy efficiency, the Henny Penny SCR-6/8 employs a unique heating design that delivers rapid heating and recovery times, reducing energy consumption and improving kitchen workflow. The unit operates with high-efficiency heating elements, which contribute to faster cooking times and lower energy bills.

Overall, the Henny Penny SCR-6/8 is a formidable tool in any culinary setting, combining powerful performance with user-friendly technology and safety features. Its versatile capabilities, efficient oil management, and durable design make it an ideal choice for foodservice operations looking to elevate their frying processes. With the SCR-6/8, operators can achieve outstanding results while maintaining a focus on safety and efficiency.
Top Page Image Contents