Hoshizaki KML-700MWH-M Water-Cooled Condenser, Connection to an Open Drain System

Page 11

2. Water-Cooled Condenser

a) Connection to an Open Drain System

•Condenser water supply inlet is 1/2" female pipe thread (FPT). A minimum of 3/8" OD copper tubing is recommended for the condenser water supply line.

•A condenser water supply line shut-off valve and drain valve should be installed.

•Condenser drain outlet is 3/8" FPT. A minimum of 3/8" OD hard pipe is recommended for the condenser drain line.

•In some areas, a back flow preventer may be required in the cooling water circuit.

Icemaker

 

Water Supply

Icemaker

Inlet

 

1/2" FPT

 

Condenser

 

Drain Outlet

 

3/8" FPT

 

Condenser Water

 

Supply Inlet

 

1/2" FPT

 

Icemaker

Bin

 

Drain Outlet

 

3/4" FPT

 

Icemaker Water Supply Line

Shut-Off Valve

Condenser Water Supply Line

Shut-Off Valve

Icemaker Water Supply Line

Drain Valve

Condenser Water Supply Line

Drain Valve

Bin Drain Outlet 3/4" FPT

Separate piping to approved drain. Leave a 2-inch (5-cm) vertical air gap between the end of each pipe and the drain.

2-inch (5-cm) air gap

Floor Drain

Fig. 4

KML-700MWH-M

 

Connection to an Open Drain System

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents KML-700MWH-M Hoshizaki AMERICA, INC Contents Unit Important Safety InformationSerious injury Indicates important information about the use and careKML-700MWH-M water-cooled marine Specifications Nameplate RatingDimensions/Connections See Fig II. Installation and Operating InstructionsChecks Before Installation How to Remove PanelsLocation Setup Electrical ConnectionIcemaker Water Supply and Drain ConnectionsSee or Connection to an Open Drain System Water-Cooled CondenserConnection to a Closed Loop System Final Checklist Startup Cleaning Procedure III. Cleaning and MaintenanceCleaning and Sanitizing Instructions Page Dispenser Unit/Storage Bin and Scoop MaintenanceSanitizing Procedure Following Cleaning Procedure Stainless Steel ExteriorRemove the water from the water-cooled condenser Preparing the Icemaker for Long StorageRemove the water from the icemaker water supply line Drain the water tankPage Hoshizaki AMERICA, INC

KML-700MWH-M specifications

The Hoshizaki KML-700MWH-M is a leading model in the realm of commercial ice makers, designed specifically for businesses that require a reliable and efficient ice production system. Known for its robust construction and advanced technologies, this unit stands out in the competitive market of ice-making machines.

One of the main features of the Hoshizaki KML-700MWH-M is its impressive ice production capacity. Capable of producing up to 700 pounds of crescent ice per day, it meets the demands of high-volume establishments such as restaurants, bars, and hotels. The crescent ice produced is not only aesthetically pleasing but also offers excellent cooling properties, making it the ideal choice for beverage service.

The machine utilizes innovative technology that ensures consistent ice quality. The ice maker is designed with a unique double-sided evaporator, which enhances efficiency and uniformity in ice production. This technology minimizes energy consumption while maximizing output, a crucial factor for environmentally conscious businesses.

Additionally, the KML-700MWH-M features a built-in water recycling system, which recirculates meltwater back into the production cycle. This efficient design not only conserves water but also promotes sustainable operations, aligning with modern practices in energy and resource management.

Ease of maintenance is another hallmark of the Hoshizaki KML-700MWH-M. The unit is equipped with a self-cleaning mode that simplifies regular upkeep, helping to prevent mineral buildup and ensuring optimal hygiene. Its front-facing service access allows technicians to perform maintenance tasks efficiently, reducing downtime and enhancing productivity.

In terms of construction, the KML-700MWH-M is built with durable stainless steel, which provides robust protection against rust and wear. Its compact design makes it suitable for various kitchen layouts, allowing businesses to optimize their space while not compromising on ice production capabilities.

The unit also incorporates advanced safety features, including sensors that monitor water levels and ice production cycles. This intelligent system alerts users to any irregularities, ensuring reliable operation and preventing potential breakdowns.

In conclusion, the Hoshizaki KML-700MWH-M is an outstanding choice for businesses needing a high-capacity, efficient, and dependable ice maker. With its cutting-edge technology, sustainable features, and robust construction, it promises to deliver exceptional ice production while supporting operational efficiency and productivity. Whether for a bustling café or a high-end restaurant, the KML-700MWH-M remains a top choice for dependable ice-making solutions.
Top Page Image Contents