Hoshizaki KML-700MWH-M instruction manual Connection to a Closed Loop System

Page 12

b) Connection to a Closed Loop System

•Condenser water supply inlet is 1/2" female pipe thread (FPT). A minimum of 3/8" OD copper tubing is recommended for the condenser water supply line.

•Condenser return outlet is 3/8" FPT. A minimum of 3/8" OD hard pipe is recommended for the condenser return line.

•Shut-off valves and drain valves should be installed at both the condenser water supply inlet and condenser return outlet.

•The water supply to the condenser should not drop below 4 GPM.

•The pressure differential between the condenser water supply inlet and condenser return outlet must be no less than 10 PSIG.

•When using a glycol blend, the solution mixture should be less than 30% glycol.

•In order to maintain the proper high side pressure, the condenser water supply inlet temperature should not drop below 45°F (7°C) and the condenser return outlet temperature must be in the 104°F to 115°F (40°C to 46°C) range. Once the icemaker installation is complete, confirm the condenser return outlet temperature 5 minutes after a freeze cycle starts. If the outlet temperature is not in the proper range, adjust the water‑regulating valve to bring it into range.

Icemaker

Water Supply Icemaker

Inlet

1/2" FPT

Condenser

Return Outlet

3/8" FPT

Condenser

Water Supply Bin

Inlet

1/2" FPT

Icemaker

Drain Outlet

3/4" FPT

Condenser Return Line

Drain Valve

Icemaker Water Supply

Line Shut-Off Valve

Condenser Water Supply Line

Shut-Off Valve

Condenser Return Line

Shut-Off Valve

Icemaker Water Supply Line

Drain Valve

Condenser Water Supply Line

Drain Valve

Separate piping to approved drain. Leave a 2-inch (5-cm) vertical air gap between the end of each pipe and the drain.

Bin Drain Outlet 3/4" FPT

2-inch (5-cm) air gap

Floor Drain

Fig. 5

KML-700MWH-M

 

Connection to a Closed Loop System

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents KML-700MWH-M Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications Nameplate Rating KML-700MWH-M water-cooled marineDimensions/Connections II. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels See FigSetup LocationElectrical Connection Water Supply and Drain Connections See orIcemaker Water-Cooled Condenser Connection to an Open Drain SystemConnection to a Closed Loop System Final Checklist Startup III. Cleaning and Maintenance Cleaning and Sanitizing InstructionsCleaning Procedure Page Maintenance Sanitizing Procedure Following Cleaning ProcedureStainless Steel Exterior Dispenser Unit/Storage Bin and ScoopPreparing the Icemaker for Long Storage Remove the water from the icemaker water supply lineDrain the water tank Remove the water from the water-cooled condenserPage Hoshizaki AMERICA, INC

KML-700MWH-M specifications

The Hoshizaki KML-700MWH-M is a leading model in the realm of commercial ice makers, designed specifically for businesses that require a reliable and efficient ice production system. Known for its robust construction and advanced technologies, this unit stands out in the competitive market of ice-making machines.

One of the main features of the Hoshizaki KML-700MWH-M is its impressive ice production capacity. Capable of producing up to 700 pounds of crescent ice per day, it meets the demands of high-volume establishments such as restaurants, bars, and hotels. The crescent ice produced is not only aesthetically pleasing but also offers excellent cooling properties, making it the ideal choice for beverage service.

The machine utilizes innovative technology that ensures consistent ice quality. The ice maker is designed with a unique double-sided evaporator, which enhances efficiency and uniformity in ice production. This technology minimizes energy consumption while maximizing output, a crucial factor for environmentally conscious businesses.

Additionally, the KML-700MWH-M features a built-in water recycling system, which recirculates meltwater back into the production cycle. This efficient design not only conserves water but also promotes sustainable operations, aligning with modern practices in energy and resource management.

Ease of maintenance is another hallmark of the Hoshizaki KML-700MWH-M. The unit is equipped with a self-cleaning mode that simplifies regular upkeep, helping to prevent mineral buildup and ensuring optimal hygiene. Its front-facing service access allows technicians to perform maintenance tasks efficiently, reducing downtime and enhancing productivity.

In terms of construction, the KML-700MWH-M is built with durable stainless steel, which provides robust protection against rust and wear. Its compact design makes it suitable for various kitchen layouts, allowing businesses to optimize their space while not compromising on ice production capabilities.

The unit also incorporates advanced safety features, including sensors that monitor water levels and ice production cycles. This intelligent system alerts users to any irregularities, ensuring reliable operation and preventing potential breakdowns.

In conclusion, the Hoshizaki KML-700MWH-M is an outstanding choice for businesses needing a high-capacity, efficient, and dependable ice maker. With its cutting-edge technology, sustainable features, and robust construction, it promises to deliver exceptional ice production while supporting operational efficiency and productivity. Whether for a bustling café or a high-end restaurant, the KML-700MWH-M remains a top choice for dependable ice-making solutions.
Top Page Image Contents