Checks Before Installation, See Fig | Hoshizaki KML-700MWH-M

II. Installation and Operating Instructions

WARNING

1.This icemaker must be installed in accordance with applicable international, national, state, and local regulations.

2.CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the dispenser unit/storage bin.

A.Checks Before Installation

•Visually inspect the exterior of the shipping container and immediately report any damage to the carrier. Upon opening the container, any concealed damage should also be immediately reported to the carrier.

•Remove the shipping carton, tape, and packing material. If any are left in the icemaker, it will not work properly.

•Remove the panels to prevent damage when installing the icemaker. See "II.B. How to Remove Panels."

•Remove the package containing the accessories.

•Remove the protective plastic film from the panels. If the icemaker is exposed to the sun or to heat, remove the film after the icemaker cools.

•Check that the refrigerant lines do not rub or touch lines or other surfaces.

•Check that the compressor is snug on all mounting pads.

•See the nameplate on the rear panel, and check that your voltage supplied corresponds with the voltage specified on the nameplate.

•This icemaker can be installed on a dispenser unit or storage bin 30" wide or wider. For options, contact your local Hoshizaki distributor.

B. How to Remove Panels

See Fig. 1

• Front Panel: Remove the screw. Lift up

and towards you.

• Top Panel: Lift up at front slightly, push

rearward, and lift off.

• Side Panel (R): Remove the screw. Slide

forward slightly and lift off.

• Front Insulation Panel: Lift up slightly, and

Top Panel

Top Insulation Panel

Front Insulation Panel

pull towards you.

• Top Insulation Panel: Lift off.

Front Panel

Side Panel

(R)

Screw

Fig. 1

KML-700MWH-M specifications

The Hoshizaki KML-700MWH-M is a leading model in the realm of commercial ice makers, designed specifically for businesses that require a reliable and efficient ice production system. Known for its robust construction and advanced technologies, this unit stands out in the competitive market of ice-making machines.

One of the main features of the Hoshizaki KML-700MWH-M is its impressive ice production capacity. Capable of producing up to 700 pounds of crescent ice per day, it meets the demands of high-volume establishments such as restaurants, bars, and hotels. The crescent ice produced is not only aesthetically pleasing but also offers excellent cooling properties, making it the ideal choice for beverage service.

The machine utilizes innovative technology that ensures consistent ice quality. The ice maker is designed with a unique double-sided evaporator, which enhances efficiency and uniformity in ice production. This technology minimizes energy consumption while maximizing output, a crucial factor for environmentally conscious businesses.

Additionally, the KML-700MWH-M features a built-in water recycling system, which recirculates meltwater back into the production cycle. This efficient design not only conserves water but also promotes sustainable operations, aligning with modern practices in energy and resource management.

Ease of maintenance is another hallmark of the Hoshizaki KML-700MWH-M. The unit is equipped with a self-cleaning mode that simplifies regular upkeep, helping to prevent mineral buildup and ensuring optimal hygiene. Its front-facing service access allows technicians to perform maintenance tasks efficiently, reducing downtime and enhancing productivity.

In terms of construction, the KML-700MWH-M is built with durable stainless steel, which provides robust protection against rust and wear. Its compact design makes it suitable for various kitchen layouts, allowing businesses to optimize their space while not compromising on ice production capabilities.

The unit also incorporates advanced safety features, including sensors that monitor water levels and ice production cycles. This intelligent system alerts users to any irregularities, ensuring reliable operation and preventing potential breakdowns.

In conclusion, the Hoshizaki KML-700MWH-M is an outstanding choice for businesses needing a high-capacity, efficient, and dependable ice maker. With its cutting-edge technology, sustainable features, and robust construction, it promises to deliver exceptional ice production while supporting operational efficiency and productivity. Whether for a bustling café or a high-end restaurant, the KML-700MWH-M remains a top choice for dependable ice-making solutions.