Hoshizaki KML-700MWH-M instruction manual Final Checklist

Page 13

G. Final Checklist

WARNING

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the dispenser unit/storage bin.

1)Is the icemaker level?

2)Is the icemaker in a site where the ambient temperature is within 45°F to 100°F (7°C to 38°C) and the water temperature within 45°F to 90°F (7°C to 32°C) all year around?

3)Is there at least 6" (15 cm) clearance at sides, rear, and top of the icemaker for proper air circulation and ease of maintenance and service?

4)Have the shipping carton, tape, and packing material been removed from the icemaker? Is the cube guide in the correct position?

5)Are all components, fasteners, and thumbscrews securely in place?

6)Have all electrical and water connections been made? Do electrical and water connections meet all international, national, state, and local code and regulation requirements?

7)Has the power supply voltage been checked or tested against the nameplate rating? Has a proper ground been installed to the icemaker? Has the transformer's voltage tap switch been positioned to match incoming voltage?

8)Are the water supply line shut-off valves and drain valves installed? Has the water supply pressure been checked to ensure a minimum of 10 PSIG and a maximum of 113 PSIG?

Note: The icemaker may stop running when the water supply is off, or if the pressure is below 10 PSIG. When the proper water pressure is reached, the icemaker automatically starts running again.

9)Are the compressor hold-down bolts snug? Have the refrigerant lines been checked to make sure they do not rub or touch other lines or surfaces?

10)Has the end user been given the instruction manual, and instructed on how to operate the icemaker and the importance of the recommended periodic maintenance?

11)Has the end user been given the name and telephone number of an authorized service agent?

12)Has the warranty card been filled out and forwarded to the factory for warranty registration?

13

Image 13
Contents KML-700MWH-M Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates important information about the use and care UnitKML-700MWH-M water-cooled marine Specifications Nameplate RatingDimensions/Connections Checks Before Installation II. Installation and Operating InstructionsHow to Remove Panels See FigLocation Setup Electrical ConnectionSee or Water Supply and Drain ConnectionsIcemaker Connection to an Open Drain System Water-Cooled CondenserConnection to a Closed Loop System Final Checklist Startup Cleaning and Sanitizing Instructions III. Cleaning and MaintenanceCleaning Procedure Page Sanitizing Procedure Following Cleaning Procedure MaintenanceStainless Steel Exterior Dispenser Unit/Storage Bin and ScoopRemove the water from the icemaker water supply line Preparing the Icemaker for Long StorageDrain the water tank Remove the water from the water-cooled condenserPage Hoshizaki AMERICA, INC

KML-700MWH-M specifications

The Hoshizaki KML-700MWH-M is a leading model in the realm of commercial ice makers, designed specifically for businesses that require a reliable and efficient ice production system. Known for its robust construction and advanced technologies, this unit stands out in the competitive market of ice-making machines.

One of the main features of the Hoshizaki KML-700MWH-M is its impressive ice production capacity. Capable of producing up to 700 pounds of crescent ice per day, it meets the demands of high-volume establishments such as restaurants, bars, and hotels. The crescent ice produced is not only aesthetically pleasing but also offers excellent cooling properties, making it the ideal choice for beverage service.

The machine utilizes innovative technology that ensures consistent ice quality. The ice maker is designed with a unique double-sided evaporator, which enhances efficiency and uniformity in ice production. This technology minimizes energy consumption while maximizing output, a crucial factor for environmentally conscious businesses.

Additionally, the KML-700MWH-M features a built-in water recycling system, which recirculates meltwater back into the production cycle. This efficient design not only conserves water but also promotes sustainable operations, aligning with modern practices in energy and resource management.

Ease of maintenance is another hallmark of the Hoshizaki KML-700MWH-M. The unit is equipped with a self-cleaning mode that simplifies regular upkeep, helping to prevent mineral buildup and ensuring optimal hygiene. Its front-facing service access allows technicians to perform maintenance tasks efficiently, reducing downtime and enhancing productivity.

In terms of construction, the KML-700MWH-M is built with durable stainless steel, which provides robust protection against rust and wear. Its compact design makes it suitable for various kitchen layouts, allowing businesses to optimize their space while not compromising on ice production capabilities.

The unit also incorporates advanced safety features, including sensors that monitor water levels and ice production cycles. This intelligent system alerts users to any irregularities, ensuring reliable operation and preventing potential breakdowns.

In conclusion, the Hoshizaki KML-700MWH-M is an outstanding choice for businesses needing a high-capacity, efficient, and dependable ice maker. With its cutting-edge technology, sustainable features, and robust construction, it promises to deliver exceptional ice production while supporting operational efficiency and productivity. Whether for a bustling café or a high-end restaurant, the KML-700MWH-M remains a top choice for dependable ice-making solutions.