Hoshizaki KML-700MWH-M instruction manual

Page 16

8)In bad or severe water conditions, clean the float switch assembly as described below. Otherwise, continue to step 9.

a.Remove the 3 screws securing the float switch assembly, then remove the assembly.

b.Remove the retainer rod from the bottom of the float switch housing, then remove the float. Be careful not to bend the retainer rod excessively when removing it.

c.Wipe down the float switch housing, shaft, float, and retainer rod with cleaning solution. Rinse the parts thoroughly with clean water.

d.Reassemble the float switch assembly and replace it in its correct position. Secure the float switch assembly with the screws.

9)Pour the cleaning solution into the water tank.

10)Move the service switch to the "WASH" position.

11)Replace the front insulation panel and the front panel in their correct positions.

12)Turn on the power supply to start the washing process.

13)Turn off the power supply after 30 minutes.

14)Remove the front panel.

15)Move the service switch to the "DRAIN" position.

16)Replace the front panel in its correct position, then turn on the power supply for 2 minutes.

17)Turn off the power supply, then remove the front panel.

18)Move the control switch to the "ICE" position.

19)Replace the front panel in its correct position.

20)Turn on the power supply to fill the water tank with water.

21)Turn off the power supply after 3 minutes.

22)Remove the front panel.

23)Move the service switch to the "WASH" position, then move the control switch to the "SERVICE" position.

24)Replace the front panel in its correct position.

25)Turn on the power supply to rinse off the cleaning solution.

26)Turn off the power supply after 5 minutes.

27)Remove the front panel.

28)Move the service switch to the "DRAIN" position.

29)Replace the front panel in its correct position, then turn on the power supply for 2 minutes.

30)Turn off the power supply.

31)Remove the front panel.

32)Repeat steps 18 through 31 three more times to rinse thoroughly.

Note: If you do not sanitize the icemaker, go to step 14 in "2. Sanitizing Procedure."

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents KML-700MWH-M Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications Nameplate Rating KML-700MWH-M water-cooled marineDimensions/Connections II. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels See FigSetup LocationElectrical Connection See or Water Supply and Drain ConnectionsIcemaker Water-Cooled Condenser Connection to an Open Drain SystemConnection to a Closed Loop System Final Checklist Startup Cleaning and Sanitizing Instructions III. Cleaning and MaintenanceCleaning Procedure Page Maintenance Sanitizing Procedure Following Cleaning ProcedureStainless Steel Exterior Dispenser Unit/Storage Bin and ScoopPreparing the Icemaker for Long Storage Remove the water from the icemaker water supply lineDrain the water tank Remove the water from the water-cooled condenserPage Hoshizaki AMERICA, INC

KML-700MWH-M specifications

The Hoshizaki KML-700MWH-M is a leading model in the realm of commercial ice makers, designed specifically for businesses that require a reliable and efficient ice production system. Known for its robust construction and advanced technologies, this unit stands out in the competitive market of ice-making machines.

One of the main features of the Hoshizaki KML-700MWH-M is its impressive ice production capacity. Capable of producing up to 700 pounds of crescent ice per day, it meets the demands of high-volume establishments such as restaurants, bars, and hotels. The crescent ice produced is not only aesthetically pleasing but also offers excellent cooling properties, making it the ideal choice for beverage service.

The machine utilizes innovative technology that ensures consistent ice quality. The ice maker is designed with a unique double-sided evaporator, which enhances efficiency and uniformity in ice production. This technology minimizes energy consumption while maximizing output, a crucial factor for environmentally conscious businesses.

Additionally, the KML-700MWH-M features a built-in water recycling system, which recirculates meltwater back into the production cycle. This efficient design not only conserves water but also promotes sustainable operations, aligning with modern practices in energy and resource management.

Ease of maintenance is another hallmark of the Hoshizaki KML-700MWH-M. The unit is equipped with a self-cleaning mode that simplifies regular upkeep, helping to prevent mineral buildup and ensuring optimal hygiene. Its front-facing service access allows technicians to perform maintenance tasks efficiently, reducing downtime and enhancing productivity.

In terms of construction, the KML-700MWH-M is built with durable stainless steel, which provides robust protection against rust and wear. Its compact design makes it suitable for various kitchen layouts, allowing businesses to optimize their space while not compromising on ice production capabilities.

The unit also incorporates advanced safety features, including sensors that monitor water levels and ice production cycles. This intelligent system alerts users to any irregularities, ensuring reliable operation and preventing potential breakdowns.

In conclusion, the Hoshizaki KML-700MWH-M is an outstanding choice for businesses needing a high-capacity, efficient, and dependable ice maker. With its cutting-edge technology, sustainable features, and robust construction, it promises to deliver exceptional ice production while supporting operational efficiency and productivity. Whether for a bustling café or a high-end restaurant, the KML-700MWH-M remains a top choice for dependable ice-making solutions.
Top Page Image Contents