Hoshizaki KMH-2000SRH/3, KMH-2000SWH/3 instruction manual Location, Setup

Page 12

C. Location

CAUTION

1.This icemaker is not intended for outdoor use. Normal operating ambient temperature should be within 45°F to 100°F (7°C to 38°C); Normal operating water temperature should be within 45°F to 90°F (7°C to 32°C). Operation of the icemaker, for extended periods, outside of these normal temperature ranges may affect icemaker performance.

2.This icemaker will not work at sub-freezing temperatures. To prevent damage to the water supply line, drain the icemaker if the air temperature is going to go below 32°F (0°C). See "III.C. Preparing the Icemaker for Long Storage."

For best operating results:

•The icemaker should not be located next to ovens, grills, or other high heat producing equipment.

•The location should provide a firm and level foundation for the equipment.

•Allow 6" (15 cm) clearance at exposed side(s), rear, and top for proper air circulation and ease of maintenance and/or service should they be required.

D. Setup

CAUTION

Before operating the icemaker, the bin control thermostat assembly must be installed correctly. Failure to properly install the assembly could result in ice backup and unit damage.

1)Assemble the storage bin according to the manufacturer's instructions.

2)Position the storage bin in the selected permanent location.

3)Level the storage bin in both

the left‑to-right and front-to‑rear directions according to the manufacturer's instructions.

4)Place the icemaker on top of the storage bin.

5)Secure the icemaker to the storage bin using the 2 mounting brackets and the bolts provided. See Fig. 2.

Icemaker

Bin

Bolts

Mounting Brackets

Fig. 2

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Stackable Crescent Cuber Models KMH-2000SWH/3 KMH-2000SRH/3 Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications Nameplate Rating KMH-2000SWH water-cooledKMH-2000SWH3 water-cooled KMH-2000SRH remote air-cooled KMH-2000SRH3 remote air-cooled Dimensions/Connections KMH-2000SWH/3 water-cooledKMH-2000SRH/3 remote air-cooled II. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels See FigSetup LocationPage Installation of Upper Unit Page Electrical Connection For All ModelsAdditional Warnings for Remote Air-Cooled Model KMH-2000SWH3 KMH-2000SRH3 Installation of Remote Condenser Unit Checks Before InstallationLocation Setup Line SetField Fabricated Line Set Installation Do not USE Thread Sealant Refrigerant Charge Line Set Exceeding 66 Feet Electrical ConnectionStacking Remote Condenser Units Water Supply and Drain Connections See , 17, orKMH-2000SRH/3 IcemakerKMH-2000SWH/3 Connection to an Open Drain System Water-Cooled CondenserKMH-2000SWH/3 Connection to a Closed Loop System Connection to a Closed Loop SystemFinal Checklist Startup III. Cleaning and Maintenance Cleaning & Sanitizing InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance Preparing the Icemaker for Long StorageDrain the water tank Hoshizaki AMERICA, INC

KMH-2000SWH/3, KMH-2000SRH/3 specifications

The Hoshizaki KMH-2000SRH/3 and KMH-2000SWH/3 are high-performance commercial ice machines designed to meet the demands of busy kitchens and establishments where a consistent supply of crushed or cubed ice is essential. Known for their superior technology and reliability, these models are ideal for restaurants, bars, and hospitality venues.

One of the main features of the KMH-2000 series is its robust ice production capacity. With the ability to produce up to 2,000 pounds of ice per day, these machines ensure that you will never run out of ice during peak service hours. This high output is coupled with a spacious storage capacity, accommodating a large volume of ice to minimize the need for frequent refills.

The KMH-2000SRH/3 model comes equipped with an advanced refrigeration system that utilizes a durable air-cooled condenser. This technology not only enhances efficiency but also contributes to energy savings, making it an environmentally friendly option. The use of high-grade stainless steel in the construction of both machines ensures durability and resistance to corrosion, which further extends their lifespan in demanding environments.

Another significant characteristic of these ice machines is their ease of operation. The intuitive control panel allows staff to monitor ice production and makes adjustments effortlessly. The Hoshizaki KMH-2000 series also features a self-cleaning cycle, which simplifies maintenance and helps prevent the buildup of bacteria and mold, maintaining the highest standards of hygiene.

The KMH-2000SRH/3 model specifically boasts a sensor that ensures optimal ice levels, automatically halting production when the bin is full. This not only prevents overflow but also conserves energy. The KMH-2000SWH/3, on the other hand, is designed for environments where space is at a premium, maintaining the same production prowess without compromising on performance.

In conclusion, the Hoshizaki KMH-2000SRH/3 and KMH-2000SWH/3 ice machines offer an outstanding combination of production capacity, reliability, and efficiency. With their advanced technological features and user-friendly design, they represent an excellent choice for any establishment requiring a consistent and abundant supply of high-quality ice. Investing in these machines means investing in a dependable solution that will enhance your operational efficiency and customer satisfaction.
Top Page Image Contents