C. Preparing the Icemaker for Long Storage
CAUTION
1.When storing the icemaker for an extended time or in
2.To prevent damage to the water pump, do not leave the control switch in the "SERVICE" position for extended periods of time when the water tank is empty.
When the icemaker is not used for two or three days under normal conditions, it is sufficient to move the control switch to the "OFF" position. When storing the icemaker for an extended time or in
1.Remove the water from the icemaker water supply line:
1)Turn off the power supply, then remove the front panel.
2)Move the control switch on the control box to the "OFF" position.
3)Close the icemaker water supply line
4)Allow the line to drain by gravity.
5)Attach compressed air or carbon dioxide supply to the icemaker water supply line drain valve.
6)Move the control switch to the "ICE" position.
7)Replace the front panel in its correct position, then turn on the power supply.
8)Blow the icemaker water supply line out using compressed air or carbon dioxide.
2.Drain the water tank:
1)Turn off the power supply, then remove the front panel.
2)Move the service switch to the "DRAIN" position, then move the control switch to the "SERVICE" position.
3)Replace the front panel in its correct position, then turn on the power supply for
2 minutes.
4)Turn off the power supply, then remove the front panel.
5)Move the control switch to the "OFF" position.
6)Replace the front panel in its correct position.
7)Remove all ice from the dispenser unit/storage bin. Clean the dispenser unit/storage bin using a neutral cleaner. Rinse thoroughly after cleaning.
8)Close the icemaker water supply line drain valve.
3.On
1)Make sure the power supply is off, then remove the front panel and right side panel.
2)Close the condenser water supply line
23