Hoshizaki KM-1400SWH/3-M instruction manual Final Checklist

Page 17

H. Final Checklist

WARNING

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the storage bin.

1)Is the icemaker level?

2)Is the icemaker in a site where the ambient temperature is within 45°F to 100°F (7°C to 38°C) and the water temperature within 45°F to 90°F (7°C to 32°C) all year around?

3)Is there at least 6" (15 cm) clearance at sides, rear, and top of the icemaker for proper air circulation and ease of maintenance and service?

4)Have the shipping carton, tape, and packing material been removed from the icemaker? Are the cube guides in their correct positions? Are the separators between the evaporator banks properly attached to their holding clips?

5)Are all components, fasteners, and thumbscrews securely in place?

6)Have all electrical and water connections been made? Do electrical and water connections meet all international, national, state, and local code and regulation requirements?

7)Has the power supply voltage been checked or tested against the nameplate rating? Has a proper ground been installed to the icemaker? Has the transformer's voltage tap switch been positioned to match incoming voltage?

8)Are the water supply line shut-off valves and drain valves installed? Has the water supply pressure been checked to ensure a minimum of 10 PSIG and a maximum of 113 PSIG?

Note: The icemaker may stop running when the water supply is off, or if the pressure is below 10 PSIG. When the proper water pressure is reached, the icemaker automatically starts running again.

9)Are the compressor hold-down bolts snug? Have the refrigerant lines been checked to make sure they do not rub or touch other lines or surfaces?

10)Has the end user been given the instruction manual, and instructed on how to operate the icemaker and the importance of the recommended periodic maintenance?

11)Has the end user been given the name and telephone number of an authorized service agent?

12)Has the warranty card been filled out and forwarded to the factory for warranty registration?

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Modular Crescent Cuber Models KM-1400SWH/3-M Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates important information about the use and care UnitKM-1400SWH-M water-cooled marine Specifications Nameplate RatingKM-1400SWH3-M water-cooled marine KM-1400SWH/3-M water-cooled marine Dimensions/ConnectionsChecks Before Installation II. Installation and Operating InstructionsHow to Remove Panels See FigLocation SetupThermostat Extension Bracket stainless Installation of Second Unit Page KM-1400SWH3-M Electrical ConnectionKM-1400SWH-M Icemaker Water Supply and Drain ConnectionsSee or Connection to an Open Drain System Water-Cooled CondenserConnection to a Closed Loop System Final Checklist Startup Cleaning & Sanitizing Instructions III. Cleaning and MaintenanceCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Preparing the Icemaker for Long Storage MaintenanceStainless Steel Exterior Storage Bin and ScoopRemove the water from the water-cooled condenser Drain the water tankHoshizaki AMERICA, INC

KM-1400SWH/3-M specifications

The Hoshizaki KM-1400SWH/3-M is a state-of-the-art ice maker designed for high-capacity ice production, catering to the needs of busy commercial establishments such as restaurants, bars, and hotels. Known for its robust construction and innovative technologies, this model stands out in the realm of ice-making equipment.

One of the main features of the KM-1400SWH/3-M is its impressive ice production capacity. It can generate up to 1,400 pounds of crescent ice daily, ensuring that businesses can efficiently meet their ice needs, even during peak hours. The crescent ice produced is not only aesthetically pleasing but also melts slowly, making it ideal for drinks and food preservation.

The KM-1400SWH/3-M utilizes Hoshizaki’s advanced refrigeration technology, which includes a stainless steel evaporator that enhances durability and ensures optimal performance. This model is designed for energy efficiency, often exceeding ENERGY STAR requirements. It features a highly efficient compressor and insulation that minimize energy consumption while maximizing ice production.

Another remarkable characteristic of this ice maker is its user-friendly interface, which simplifies operation and maintenance. The machine includes a built-in control panel that allows easy monitoring of functions and diagnostics. Additionally, the ice maker’s vertical evaporator design reduces the size of the unit while increasing ice production efficiency, making it suitable for tight spaces.

Hoshizaki prioritizes hygiene and ease of maintenance. The KM-1400SWH/3-M has a removable air filter and an automated cleaning cycle that helps maintain optimal sanitary conditions, significantly reducing the frequency of manual cleaning. The antimicrobial surface also aids in preventing bacterial growth, promoting a healthier environment.

In terms of adaptability, the Hoshizaki KM-1400SWH/3-M can work seamlessly with various water conditions, making it a versatile choice for different setups. It operates well in both high and low ambient temperatures, providing consistent ice production regardless of external factors.

Overall, the Hoshizaki KM-1400SWH/3-M is a reliable, high-capacity ice maker that combines modern technology, energy efficiency, and user-friendly features. Its durable construction and innovative design make it an excellent choice for any commercial operation requiring a steady supply of high-quality ice.
Top Page Image Contents