Hoshizaki KM-1400SWH/3-M instruction manual Maintenance, Preparing the Icemaker for Long Storage

Page 22

B. Maintenance

This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.

WARNING

1.Only qualified service technicians should attempt to service this icemaker.

2.Disconnect power before servicing.

1. Stainless Steel Exterior

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dirt buildup.

2.Storage Bin and Scoop

•Wash your hands before removing ice. Use the plastic scoop provided (bin accessory).

•The storage bin is for ice use only. Do not store anything else in the storage bin.

•Clean the scoop and the storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.

C. Preparing the Icemaker for Long Storage

CAUTION

1.When storing the icemaker for an extended time or in sub-freezing temperatures, follow the instructions below to prevent damage.

2.To prevent damage to the water pump seal, do not operate the icemaker with the control switch in the "WASH" position when the water tank is empty.

When the icemaker is not used for two or three days under normal conditions, it is sufficient to move the control switch to the "OFF" position. When storing the icemaker for an extended time or in sub-freezing temperatures, follow the instructions below.

1.Remove the water from the icemaker water supply line:

1)Turn off the power supply, then remove the front panel.

2)Move the control switch on the control box to the "OFF" position.

3)Close the icemaker water supply line shut-off valve, then open the icemaker water supply line drain valve.

4)Allow the line to drain by gravity.

5)Attach a compressed air or carbon dioxide supply to the icemaker water supply line drain valve.

6)Move the control switch to the "ICE" position.

7)Replace the front panel in its correct position, then turn on the power supply.

8)Blow the icemaker water supply line out using the compressed air or carbon dioxide supply.

9)Close the icemaker water supply line drain valve.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Modular Crescent Cuber Models KM-1400SWH/3-M Hoshizaki AMERICA, INC Contents Indicates important information about the use and care Important Safety InformationSerious injury UnitSpecifications Nameplate Rating KM-1400SWH-M water-cooled marineKM-1400SWH3-M water-cooled marine Dimensions/Connections KM-1400SWH/3-M water-cooled marineHow to Remove Panels II. Installation and Operating InstructionsChecks Before Installation See FigSetup LocationThermostat Extension Bracket stainless Installation of Second Unit Page KM-1400SWH-M Electrical ConnectionKM-1400SWH3-M See or Water Supply and Drain ConnectionsIcemaker Water-Cooled Condenser Connection to an Open Drain SystemConnection to a Closed Loop System Final Checklist Startup III. Cleaning and Maintenance Cleaning & Sanitizing InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Stainless Steel Exterior MaintenancePreparing the Icemaker for Long Storage Storage Bin and ScoopDrain the water tank Remove the water from the water-cooled condenserHoshizaki AMERICA, INC

KM-1400SWH/3-M specifications

The Hoshizaki KM-1400SWH/3-M is a state-of-the-art ice maker designed for high-capacity ice production, catering to the needs of busy commercial establishments such as restaurants, bars, and hotels. Known for its robust construction and innovative technologies, this model stands out in the realm of ice-making equipment.

One of the main features of the KM-1400SWH/3-M is its impressive ice production capacity. It can generate up to 1,400 pounds of crescent ice daily, ensuring that businesses can efficiently meet their ice needs, even during peak hours. The crescent ice produced is not only aesthetically pleasing but also melts slowly, making it ideal for drinks and food preservation.

The KM-1400SWH/3-M utilizes Hoshizaki’s advanced refrigeration technology, which includes a stainless steel evaporator that enhances durability and ensures optimal performance. This model is designed for energy efficiency, often exceeding ENERGY STAR requirements. It features a highly efficient compressor and insulation that minimize energy consumption while maximizing ice production.

Another remarkable characteristic of this ice maker is its user-friendly interface, which simplifies operation and maintenance. The machine includes a built-in control panel that allows easy monitoring of functions and diagnostics. Additionally, the ice maker’s vertical evaporator design reduces the size of the unit while increasing ice production efficiency, making it suitable for tight spaces.

Hoshizaki prioritizes hygiene and ease of maintenance. The KM-1400SWH/3-M has a removable air filter and an automated cleaning cycle that helps maintain optimal sanitary conditions, significantly reducing the frequency of manual cleaning. The antimicrobial surface also aids in preventing bacterial growth, promoting a healthier environment.

In terms of adaptability, the Hoshizaki KM-1400SWH/3-M can work seamlessly with various water conditions, making it a versatile choice for different setups. It operates well in both high and low ambient temperatures, providing consistent ice production regardless of external factors.

Overall, the Hoshizaki KM-1400SWH/3-M is a reliable, high-capacity ice maker that combines modern technology, energy efficiency, and user-friendly features. Its durable construction and innovative design make it an excellent choice for any commercial operation requiring a steady supply of high-quality ice.
Top Page Image Contents