Hoshizaki KM-1400SWH/3-M instruction manual Sanitizing Procedure Following Cleaning Procedure

Page 21

22)Move the control switch to the "WASH" position.

23)Replace the front panel in its correct position.

24)Turn on the power supply to rinse off the cleaning solution.

25)Turn off the power supply after 5 minutes.

26)Remove the front panel and the insulation panel.

27)Remove the drain plug. Allow the water tank to drain. Replace the drain plug and the insulation panel in their correct positions.

Note: Do not replace the insulation panel when you proceed to "2. Sanitizing Procedure."

28)Repeat steps 16 through 27 three more times to rinse thoroughly.

Note: If you do not sanitize the icemaker, go to step 9 in "2. Sanitizing Procedure."

2.Sanitizing Procedure - Following Cleaning Procedure

1)Dilute 2.5 fl. oz. (74 ml or 5 tbs) of a 5.25% sodium hypochlorite solution (chlorine bleach) with 5 gal. (19 l) of warm water.

2)Pour the sanitizing solution into the water tank.

3)Replace the insulation panel and the front panel in their correct positions.

Note: Make sure the control switch is in the "WASH" position and the cleaning valve is open.

4)Turn on the power supply to start the sanitizing process.

5)Turn off the power supply after 15 minutes.

6)Remove the front panel and the insulation panel.

7)Remove the drain plug. Allow the water tank to drain. Replace the drain plug and the insulation panel in their correct positions.

8)Repeat steps 16 through 27 in "1. Cleaning Procedure" two times to rinse thoroughly.

9)Close the cleaning valve.

10)Move the control switch to the "ICE" position.

11)Replace the front panel in its correct position.

12)Clean the storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.

13)Turn on the power supply to start the automatic icemaking process.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Modular Crescent Cuber Models KM-1400SWH/3-M Hoshizaki AMERICA, INC Contents Serious injury Important Safety InformationIndicates important information about the use and care UnitKM-1400SWH-M water-cooled marine Specifications Nameplate RatingKM-1400SWH3-M water-cooled marine KM-1400SWH/3-M water-cooled marine Dimensions/ConnectionsChecks Before Installation II. Installation and Operating InstructionsHow to Remove Panels See FigLocation SetupThermostat Extension Bracket stainless Installation of Second Unit Page Electrical Connection KM-1400SWH-MKM-1400SWH3-M Water Supply and Drain Connections See orIcemaker Connection to an Open Drain System Water-Cooled CondenserConnection to a Closed Loop System Final Checklist Startup Cleaning & Sanitizing Instructions III. Cleaning and MaintenanceCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Preparing the Icemaker for Long Storage MaintenanceStainless Steel Exterior Storage Bin and ScoopRemove the water from the water-cooled condenser Drain the water tankHoshizaki AMERICA, INC

KM-1400SWH/3-M specifications

The Hoshizaki KM-1400SWH/3-M is a state-of-the-art ice maker designed for high-capacity ice production, catering to the needs of busy commercial establishments such as restaurants, bars, and hotels. Known for its robust construction and innovative technologies, this model stands out in the realm of ice-making equipment.

One of the main features of the KM-1400SWH/3-M is its impressive ice production capacity. It can generate up to 1,400 pounds of crescent ice daily, ensuring that businesses can efficiently meet their ice needs, even during peak hours. The crescent ice produced is not only aesthetically pleasing but also melts slowly, making it ideal for drinks and food preservation.

The KM-1400SWH/3-M utilizes Hoshizaki’s advanced refrigeration technology, which includes a stainless steel evaporator that enhances durability and ensures optimal performance. This model is designed for energy efficiency, often exceeding ENERGY STAR requirements. It features a highly efficient compressor and insulation that minimize energy consumption while maximizing ice production.

Another remarkable characteristic of this ice maker is its user-friendly interface, which simplifies operation and maintenance. The machine includes a built-in control panel that allows easy monitoring of functions and diagnostics. Additionally, the ice maker’s vertical evaporator design reduces the size of the unit while increasing ice production efficiency, making it suitable for tight spaces.

Hoshizaki prioritizes hygiene and ease of maintenance. The KM-1400SWH/3-M has a removable air filter and an automated cleaning cycle that helps maintain optimal sanitary conditions, significantly reducing the frequency of manual cleaning. The antimicrobial surface also aids in preventing bacterial growth, promoting a healthier environment.

In terms of adaptability, the Hoshizaki KM-1400SWH/3-M can work seamlessly with various water conditions, making it a versatile choice for different setups. It operates well in both high and low ambient temperatures, providing consistent ice production regardless of external factors.

Overall, the Hoshizaki KM-1400SWH/3-M is a reliable, high-capacity ice maker that combines modern technology, energy efficiency, and user-friendly features. Its durable construction and innovative design make it an excellent choice for any commercial operation requiring a steady supply of high-quality ice.
Top Page Image Contents