Hoshizaki KM-1400SWH/3-M II. Installation and Operating Instructions, Checks Before Installation

Page 8

II. Installation and Operating Instructions

WARNING

1.This icemaker must be installed in accordance with applicable international, national, state, and local regulations.

2.CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the storage bin.

A.Checks Before Installation

•Visually inspect the exterior of the shipping container and immediately report any damage to the carrier. Upon opening the container, any concealed damage should also be immediately reported to the carrier.

•Remove the shipping carton, tape, and packing material. If any are left in the icemaker, it will not work properly.

•Remove the panels to prevent damage when installing the icemaker. See "II.B. How to Remove Panels."

•Remove the package containing the accessories.

•Remove the protective plastic film from the panels. If the icemaker is exposed to the sun or to heat, remove the film after the icemaker cools.

•Check that the refrigerant lines do not rub or touch lines or other surfaces.

•Check that the compressor is snug on all mounting pads.

•See the nameplate on the rear panel, and check that your voltage supplied corresponds with the voltage specified on the nameplate.

•This icemaker can be installed on a storage bin 48" wide or wider. For options, contact your local Hoshizaki distributor.

B. How to Remove Panels

See Fig. 1

•Front Panel: Remove the 2 screws. Lift up and towards you.

•Top Panel: Remove the 2 screws, and then lift off.

•Side Panel (R): Remove the screw. Slide forward slightly and lift off.

•Insulation Panel: Remove the thumbscrew. Lift up slightly and pull towards you.

•Top Insulation: Lift off.

Top

Insulation

Insulation

Panel

Front Panel

Top Panel

Side Panel (R)

Fig. 1

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Modular Crescent Cuber Models KM-1400SWH/3-M Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications Nameplate Rating KM-1400SWH-M water-cooled marineKM-1400SWH3-M water-cooled marine Dimensions/Connections KM-1400SWH/3-M water-cooled marineII. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels See FigSetup LocationThermostat Extension Bracket stainless Installation of Second Unit Page KM-1400SWH3-M Electrical ConnectionKM-1400SWH-M Icemaker Water Supply and Drain ConnectionsSee or Water-Cooled Condenser Connection to an Open Drain SystemConnection to a Closed Loop System Final Checklist Startup III. Cleaning and Maintenance Cleaning & Sanitizing InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance Preparing the Icemaker for Long StorageStainless Steel Exterior Storage Bin and ScoopDrain the water tank Remove the water from the water-cooled condenserHoshizaki AMERICA, INC

KM-1400SWH/3-M specifications

The Hoshizaki KM-1400SWH/3-M is a state-of-the-art ice maker designed for high-capacity ice production, catering to the needs of busy commercial establishments such as restaurants, bars, and hotels. Known for its robust construction and innovative technologies, this model stands out in the realm of ice-making equipment.

One of the main features of the KM-1400SWH/3-M is its impressive ice production capacity. It can generate up to 1,400 pounds of crescent ice daily, ensuring that businesses can efficiently meet their ice needs, even during peak hours. The crescent ice produced is not only aesthetically pleasing but also melts slowly, making it ideal for drinks and food preservation.

The KM-1400SWH/3-M utilizes Hoshizaki’s advanced refrigeration technology, which includes a stainless steel evaporator that enhances durability and ensures optimal performance. This model is designed for energy efficiency, often exceeding ENERGY STAR requirements. It features a highly efficient compressor and insulation that minimize energy consumption while maximizing ice production.

Another remarkable characteristic of this ice maker is its user-friendly interface, which simplifies operation and maintenance. The machine includes a built-in control panel that allows easy monitoring of functions and diagnostics. Additionally, the ice maker’s vertical evaporator design reduces the size of the unit while increasing ice production efficiency, making it suitable for tight spaces.

Hoshizaki prioritizes hygiene and ease of maintenance. The KM-1400SWH/3-M has a removable air filter and an automated cleaning cycle that helps maintain optimal sanitary conditions, significantly reducing the frequency of manual cleaning. The antimicrobial surface also aids in preventing bacterial growth, promoting a healthier environment.

In terms of adaptability, the Hoshizaki KM-1400SWH/3-M can work seamlessly with various water conditions, making it a versatile choice for different setups. It operates well in both high and low ambient temperatures, providing consistent ice production regardless of external factors.

Overall, the Hoshizaki KM-1400SWH/3-M is a reliable, high-capacity ice maker that combines modern technology, energy efficiency, and user-friendly features. Its durable construction and innovative design make it an excellent choice for any commercial operation requiring a steady supply of high-quality ice.
Top Page Image Contents