InSinkErator Hot1 owner manual Troubleshooting, Problem Possible Cause What to do

Page 7

Please read Troubleshooting Guide and/or visit www.insinkerator.com before calling AnswerLine™

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

WHAT TO DO

Water and steam spits

• Unit is boiling.

• Depress faucet lever to release some water from

forcefully from spout

May be normal during initial setup.

the tank.

without turning on the

• Adjust water temperature using dial on tank front.

 

dispenser faucet.

 

 

Remember that at higher altitudes, water boils

 

 

 

 

at lower temperatures.

 

 

 

Water is not hot

• The unit is unplugged.

• Make sure the unit is connected to a properly grounded

 

• The electric outlet is inoperative.

electric outlet.

 

• Make sure the circuit breaker fuse is functioning properly.

 

 

 

 

• Check that the outlet is not switched off.

 

 

 

Water is too hot

• Thermostat is not adjusted to

• Adjust the thermostat slowly, then depress or twist faucet handle

or not hot enough

your needs.

for 20 seconds to bring in fresh water to be heated at the new

 

 

setting. Allow 5-7 minutes for water to reach new temperature.

 

 

 

Water is dripping from

• The expansion chamber isn’t draining

• Unplug the unit. If the dripping doesn’t stop after a few

the spout/vent

properly due to low water pressure.

minutes, check the supply valve to ensure that is fully

intermittently

• The spout is blocked.

open and there are no obstructions in the water line

 

reducing the pressure below 30 psi (i.e., a poorly mounted

 

 

 

 

saddle valve, a clogged water filter, or a partially opened

 

 

shut-off valve).

 

 

• Unscrew spout end piece and clean out any debris.

 

 

 

Water is dripping

• Debris in the water line may be

• Unscrew spout end piece and clean out any debris.

from the spout/vent

in the faucet valve seat causing a

• Depress lever 7-10 times to flush faucet & lines.

constantly

slow water leak.

 

 

 

 

Divided stream

• Debris in the end piece.

• Unscrew spout end piece and clean out any debris.

 

 

 

If you are still experiencing trouble call the AnswerLine™ 1-800-558-5700.

Surtidor de agua caliente al instante

Manual de propietario

Installation, Care & Use

Instalación, Cuidado & Uso

Installation, entretien et mode d’emploi

12

Modelo Hot1

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Instant Hot Water Dispenser What YOU should Know Before YOU Begin What if you don’t have a sprayer hole or DimensionsPreparation That operates your disposerSaddle valve option not supplied Installing the DispenserShutoff valve option not supplied Fill the Tank & Connect Power Connecting Water to DispenserWarranty Warranty InformationYear Warranty Disconnect power From unitProblem Possible Cause What to do TroubleshootingCada paso La narraciónMínimo requerido a partir del Dimensiones PreparaciónOpción de válvula de cierre no incluida Instalación DEL SurtidorOpciones DE Conexión DE Agua Opción de válvula de compresión o conector en T no incluidoConexión DE Agua AL Surtidor Unidad Cuidado Y USOInformación DE LA Garantía Garantía de un añoProblema Causa Posible QUÉ Hacer Solución DE ProblemasCe que vous verrez dans le manuel d’in- structions CE QUE Vous Devriez Savoir Avant DE CommencerMinimum requis du DIMENSIONS1 PréparationCentre du trou au mur Option à robinet-vanne non fourni Installation DU DistributeurOptions DE Raccord D’EAU Option à valve de compression ou raccord en T non fournisRaccorder L’EAU AU Distributeur Pour ajuster la Entretien ET UtilisationInformation SUR LA Garantie Garantie d’un anProblème Causes Possibles Quoi Faire Dépannage

Hot1 specifications

The InSinkErator Hot1 is a revolutionary product designed to simplify and enhance your kitchen experience. This innovative appliance delivers instant hot water, making it an invaluable tool for cooking, cleaning, and beverage preparation. Whether you need boiling water for instant coffee or tea, cooking pasta, or cleaning stubborn stains, the InSinkErator Hot1 is designed to deliver immediate hot water at your convenience.

One of the main features of the Hot1 is its impressive heating capability. It can provide water at a temperature of up to 200 degrees Fahrenheit, making it perfect for various culinary and household tasks. The tank of the Hot1 is compact yet powerful, capable of holding a substantial amount of hot water, which means you won’t have to wait for the kettle to boil or use up valuable time preparing hot water.

Technologically, the InSinkErator Hot1 is equipped with advanced insulation, which helps maintain the water temperature while minimizing energy consumption. This feature not only ensures that your hot water is always at the ready but also contributes to increased energy efficiency. The unit's sleek design includes a user-friendly faucet that allows for easy dispensing, making it a safe and convenient option for users of all ages.

In terms of safety, the Hot1 has been engineered with a safety lock mechanism. This feature prevents accidental activation, making it particularly suitable for households with children or pets. The faucet’s ergonomic design further enhances usability, allowing users to comfortably fill up pots or cups without any hassle.

Additionally, the InSinkErator Hot1 is easy to install and can fit seamlessly into most kitchen designs. The durable materials used in the construction of the unit ensure longevity and reliability, giving homeowners peace of mind in their investment. With minimal maintenance required, users can enjoy the convenience of instant hot water without the burden of complicated upkeep.

Overall, the InSinkErator Hot1 stands out in the market for its combination of performance, efficiency, and safety. It's an essential addition to any modern kitchen, providing instant access to hot water for a variety of tasks, and simplifying daily routines. Whether you’re a cooking enthusiast or someone looking to streamline household chores, the InSinkErator Hot1 promises to make your life easier and more enjoyable.
Top Page Image Contents