InSinkErator Hot1 owner manual Connecting Water to Dispenser, Fill the Tank & Connect Power

Page 5

CONNECTING WATER TO DISPENSER

4 A

■ Bend and position the 1/4" copper

 

line from the dispenser so it fits into

 

the cold water supply. With one hand,

 

support the copper line coming out

 

of the tank and bend the tube with

 

the other hand.

 

Do not kink. Bend tube carefully.

Property Damage: Make sure the bends in tubing are

 

smooth and not kinked. Don’t use paste-type sealants on

 

water line connections. Tighten compression fittings

 

snug but don’t over tighten.

 

5 A

FILL THE TANK & CONNECT POWER

■ First, open the shutoff valve all the

 

way and see if your connections are

 

watertight. If there are any leaks

 

carefully re-tighten all connections.

Property Damage: Never place a restriction on the delivery of water from the spout. Such a restriction prevents draining the expansion chamber and could damage the tank.

B

Nut Ferrule

■When connecting to a compression type T-fitting or valve, remove the nut and ferrule (round brass piece) from the fitting. Then, place the nut followed by the ferrule over the end of the tube coming from the dispenser.

B

Valve Lever

■Press valve lever down for about 20 seconds until water freely runs out of the spout. Hold valve open at least 60 seconds to let the water run to flush out the lines.

■Water will be cold since tank has not been plugged in yet.

Property Damage: Do not connect electric power until tank is filled with water. Failure to do so may damage heating element or thermal safety fuse and will void the warranty.

C

■ Push the tube end all the way into

 

the T-fitting or valve. Hold the tube

 

end in position and push the ferrule

 

down as far as it will go. Then,

 

tighten the nut over the ferrule with

 

your fingers. Make sure the tube

 

end is going straight into the hole.

 

Then tighten the nut firmly with a

 

1/2" wrench.

C

Property Damage: Do not remove or alter the thermal safety fuse. If you suspect the thermal fuse is open, contact your Authorized Service Center.

■Check all connections to ensure they are tight and that there are no leaks, then plug in instant hot water tank.

Allow 10-15 minutes for water to reach target temperature. Gurgling or hissing is normal during the initial heating cycle. Steam and/or hot water coming from the spout without pressing down on the handle is also normal. If steam is still emitted after setup, thermostat adjustments may be needed (pg. 11).

8

9

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Instant Hot Water Dispenser What YOU should Know Before YOU Begin Preparation DimensionsThat operates your disposer What if you don’t have a sprayer hole orShutoff valve option not supplied Installing the DispenserSaddle valve option not supplied Fill the Tank & Connect Power Connecting Water to DispenserYear Warranty Warranty InformationDisconnect power From unit WarrantyProblem Possible Cause What to do TroubleshootingCada paso La narraciónMínimo requerido a partir del Dimensiones PreparaciónOpciones DE Conexión DE Agua Instalación DEL SurtidorOpción de válvula de compresión o conector en T no incluido Opción de válvula de cierre no incluidaConexión DE Agua AL Surtidor Información DE LA Garantía Cuidado Y USOGarantía de un año UnidadProblema Causa Posible QUÉ Hacer Solución DE ProblemasCe que vous verrez dans le manuel d’in- structions CE QUE Vous Devriez Savoir Avant DE CommencerCentre du trou au mur DIMENSIONS1 PréparationMinimum requis du Options DE Raccord D’EAU Installation DU DistributeurOption à valve de compression ou raccord en T non fournis Option à robinet-vanne non fourniRaccorder L’EAU AU Distributeur Information SUR LA Garantie Entretien ET UtilisationGarantie d’un an Pour ajuster laProblème Causes Possibles Quoi Faire Dépannage

Hot1 specifications

The InSinkErator Hot1 is a revolutionary product designed to simplify and enhance your kitchen experience. This innovative appliance delivers instant hot water, making it an invaluable tool for cooking, cleaning, and beverage preparation. Whether you need boiling water for instant coffee or tea, cooking pasta, or cleaning stubborn stains, the InSinkErator Hot1 is designed to deliver immediate hot water at your convenience.

One of the main features of the Hot1 is its impressive heating capability. It can provide water at a temperature of up to 200 degrees Fahrenheit, making it perfect for various culinary and household tasks. The tank of the Hot1 is compact yet powerful, capable of holding a substantial amount of hot water, which means you won’t have to wait for the kettle to boil or use up valuable time preparing hot water.

Technologically, the InSinkErator Hot1 is equipped with advanced insulation, which helps maintain the water temperature while minimizing energy consumption. This feature not only ensures that your hot water is always at the ready but also contributes to increased energy efficiency. The unit's sleek design includes a user-friendly faucet that allows for easy dispensing, making it a safe and convenient option for users of all ages.

In terms of safety, the Hot1 has been engineered with a safety lock mechanism. This feature prevents accidental activation, making it particularly suitable for households with children or pets. The faucet’s ergonomic design further enhances usability, allowing users to comfortably fill up pots or cups without any hassle.

Additionally, the InSinkErator Hot1 is easy to install and can fit seamlessly into most kitchen designs. The durable materials used in the construction of the unit ensure longevity and reliability, giving homeowners peace of mind in their investment. With minimal maintenance required, users can enjoy the convenience of instant hot water without the burden of complicated upkeep.

Overall, the InSinkErator Hot1 stands out in the market for its combination of performance, efficiency, and safety. It's an essential addition to any modern kitchen, providing instant access to hot water for a variety of tasks, and simplifying daily routines. Whether you’re a cooking enthusiast or someone looking to streamline household chores, the InSinkErator Hot1 promises to make your life easier and more enjoyable.
Top Page Image Contents