Sanitizing Procedure

Section 4

Maintenance

Use sanitizer to remove algae or slime. Do not use it to remove lime scale or other mineral deposits. To initiate a sanitizing cycle using Manitowoc’s Patented Cleaning/Sanitizing Technology use the following procedure.

Step 1 Set the toggle switch to the OFF position after ice falls from the evaporator at the end of a Harvest cycle. Or, set the switch to the OFF position and allow the ice to melt off the evaporator.

CAUTION

Never use anything to force ice from the evaporator. Damage may result.

Step 2 To start a sanitizing cycle, move the toggle switch to the CLEAN position. The water will flow through the water dump valve and down the drain. The Clean light will turn on to indicate the ice machine is in the Cleaning mode.

Step 3 Wait about one minute or until water starts to flow over the evaporator.

Step 4 Add the proper amount of Manitowoc Ice Machine Sanitizer to the water trough.

Model	Amount of Sanitizer
Q1800	6 ounces (180 ml)

Step 5 The ice machine will automatically time out a ten-minute sanitizing cycle, followed by six rinse cycles, and then stop. The Clean light will turn off to indicate the sanitizing mode is completed. This entire cycle lasts approximately 25 minutes.

Note: Periodic cleaning must be performed on adjacent surface areas not contacted by the water distribution system. If the bin requires sanitizing, remove all of the ice and sanitize it with a solution of 1 ounce (30 ml) of sanitizer with up to 4 gallons (15/l) of water.

Step 6 When the sanitizing process stops, move the toggle switch to the ICE position to start making ice again.

Step 7

A.The ice machine may be set to start and finish a sanitizing procedure, and then automatically start ice making again.

B.Wait about one minute into the sanitizing cycle (until water starts to flow over the evaporator), then move the switch from WASH to ICE position.

C.When the sanitizing cycle is completed, the clean light will turn off and a ice making sequence will start automatically.

NOTE: After the toggle switch is moved to the ICE position, opening the curtain switch will interrupt the sanitizing sequence. The sequence will resume from the point of interruption when the curtain switch closes.

4-3

Q 1800 specifications

The Manitowoc Ice Q 1800 is a sophisticated ice machine known for its efficiency and reliability, designed to meet the high demands of commercial establishments. This model stands out in the market thanks to its innovative features, cutting-edge technologies, and sturdy construction.

One of the standout features of the Manitowoc Ice Q 1800 is its production capacity, capable of producing up to 1800 pounds of ice per day. This high output makes it suitable for busy restaurants, bars, and hotels. The machine's ice-making process is particularly efficient, utilizing a self-contained refrigeration system that allows for quick and consistent ice production.

This model is equipped with a durable stainless steel exterior, which not only enhances its aesthetic appeal but also ensures longevity and easy maintenance. The stainless steel design resists corrosion, making it perfect for environments where water and humidity levels are high. Additionally, the insulated bin keeps ice frozen for extended periods, reducing waste and ensuring solid ice quality throughout each service rush.

In terms of technology, the Ice Q 1800 features a smart control system that monitors the ice-making process and alerts users when maintenance is needed. This predictive feature helps prevent breakdowns and extends the machine's lifespan, ultimately saving money on repairs and downtime. The integrated water filtration system ensures that the ice produced is clean and free of impurities, which is vital for both health and taste in beverages served.

A focus on energy efficiency further sets the Manitowoc Ice Q 1800 apart. It operates with low energy consumption, qualifying for various energy-saving certifications. This not only helps businesses reduce their carbon footprint but also lowers utility expenses, making it a cost-effective option.

Users will appreciate the ease of installation and operation, along with the intuitive interface that simplifies the machine’s settings. Furthermore, the Ice Q 1800 is built to adapt to different environments, with options for both air-cooled and water-cooled configurations.

In summary, the Manitowoc Ice Q 1800 delivers a powerful combination of high ice production capacity, robust construction, advanced technology, and energy efficiency, making it an excellent choice for any commercial establishment needing reliable ice production.