Grindmaster About the 67710E Coffee Urn General Description, Features of This Model, Operation

Page 4

About the 67710E Coffee Urn

General Description

This coffee urn has been engineered to suit the special needs of the prison environment. This section highlights the characteristics and special features of the product.

The urn is a large capacity, high-speed, coffee brewing and holding unit. The body is constructed of two walls of stainless steel with insulation between. Inside is a large capacity water tank where the brew is heated. Two ten gallon liners fit into that tank. Each liner has its own controls which start and stop the brew process with the push of a button. A pump draws water from the tank and sprays it over the grounds which are placed above the liners. Faucets on the front of the urn allow the dispense of coffee from each liner and hot water from the tank. A control automatically refills the tank as water is drawn off. A thermostat regulates the temperature by switching electric heating elements inside the tank.

Features of This Model

Safety and Security

No parts removable by hand.

No breakable parts.

Minimization of screw fastened parts on exterior. All remaining screws are one way.

Lockable covers over control compartment and brewing area. When locked, there is no access to hot water or coffee except through faucet.

Security faucets with wrench tight, metal bonnets and self closing handles.

Insulated body stays cooler.

Lock our brew controls.

Drain handle located inside control enclosure.

Flanged feet may be bolted to table.

Operation

Fully automatic brew cycle with automatic air agitation.

Adjustable timer, by-pass, sprayover rate, and thermostat.

Sensors indicate coffee in liner - no gauge glass.

Automatic Refill and Low-Water, Heater Cutoff.

Stainless steel mesh coffee filter.

High Speed Brewing - Brew in both liners simultaneously.

Maintenance

All components are easily accessible in the side control enclosure.

Replace most components without draining the urn.

Durable, easy to clean, 304 stainless steel construction.

 

 

American Metal Ware 67710E Coffee Urn

Page 4

Image 4
Contents Model 67710E American Metal Ware 67710E Coffee Urn Introduction Features of This Model Safety and SecurityMaintenance About the 67710E Coffee Urn General DescriptionPre-Installation Package Contents American Metal Ware 67710E Coffee Urn Installation Initial ConsiderationsService Hookup Locations Electric Hook-UpInitial Start Up Load the Coffee Start the BrewAfter the Brew is Finished Adjustments Bypass AdjustmentThermostat Adjustment To change the water tank temperatureTo Change the Water Tank Temperature Timer AdjustmentFlow Rate Adjustment To Adjust the TimerFill Rate Adjustment To adjust the rateTo Adjust the Fill Rate Cleaning After Each UseEach Day Semi-WeeklyAmerican Metal Ware 67710E Coffee Urn American Metal Ware 67710E Coffee Urn American Metal Ware 67710E