GE Monogram ZGU385N, ZGU385L installation instructions Adjust Burner Flames

Page 16

Installation Instructions for Natural to LP Gas Conversion

2 CHANGE BURNER ORIFICES (cont.)

IMPORTANT: Orifices must be located exactly as shown. Carefully read and observe each orifice label for correct location.

SIMMER

 

 

 

 

 

 

 

 

The 34SL and

 

 

 

 

 

 

 

 

 

 

ORIFICES

 

 

 

 

 

 

 

 

51SN are for all

 

 

 

 

 

 

 

 

 

 

 

five burners.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3ADJUST BURNER FLAMES

A.Turn all burners on highest setting and check the flames. They should be blue in color and may have some yellow tipping at the ends of the flame when using LP gas.

Foreign particles in the gas line may cause an orange flame at first, but this will soon disappear.

B.Turn the cooktop burner knob to “LO” while observing the flame.

Adjust the setting of the upper row of flames using the valve bypass screw as follows:

Adjustments must be made with two other burners in operation on a medium setting. This prevents the upper row of flames from being set too low, resulting in the flame being extinguished when other burners are turned on.

C.To adjust the flame, remove the knobs. Insert a screwdriver through the access hole in valve shaft as shown.

MAIN

ORIFICES

108XL

190XN

 

84XL

 

 

138XN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

84XL 148XN

• If the flames were too small or fluttered, open the valve

more than the original setting.

• If the flames blew away from the burner, close the valve

more than the original setting.

D. Make the adjustment by slowly turning the screw until

flame appearance is correct.

E. Testing Flame Stability:

Test 1 – Turn the knob from “HI” to “LO” quickly.

If the upper row of flames goes out at this setting,

increase the flame size and test again.

Test 2 – With the burner on “LO”, open and close the

cabinet door under the cooktop. If the flame is

extinguished by the air currents created by the

door movement, increase the flame height and

test again.

C.Install the proper orifices in the exact locations as noted in the illustrations above.

D.Return the natural gas orifices to the bracket and reattach the bracket and the instruction sheet to the pressure regulator using the screw removed previously.

E.Replace the burner bases, heads, caps and top grates.

NOTE: When the burner is on the “SIM” setting, the upper

row of flames will go out.

F. Flame Recheck:

After the adjustment is made, turn all burners off. Ignite

each burner individually. Observe the flame at the “HI”

position. Rotate the knob to the lowest setting and be

sure that the flame size decreases as the knob is

rotated counterclockwise.

Once the conversion is complete and checked ok,

fill out the conversion sticker and include your name,

organization and date conversion was made. Apply

the sticker near the cooktop gas inlet opening to

alert others in the future that this appliance has been

converted. If converting back to the original gas, please

remove the sticker so others know the appliance is set

to use its original gas.

16

Image 16
Contents Questions? Call 800.GE.CARES La section française commence à laSafety Information For Your SafetyBefore YOU Begin What to do if YOU Smell GASContents Electrical RequirementsInstallation Preparation Tools YOU will Need For InstallationModels Available Parts IncludedInstallation Options Cooktop and ZVB36 Downdraft Vent Combination InstallationInstallation Above Cabinet Drawers Advance PlanningPRE-INSTALLATION Checklist Dimensions and Clearances Power Supply Locations Optional Combination InstallationsGas supply Electrical supplyInstallation Instructions Install the CooktopInstall Pressure Regulator Connect ElectricalAssemble BURNERS, Check Ignition Check ignitersBurners should be checked frequently Operation ChecklistEdges Installation Options 23-5/16Surface 16″ cooktop overlap 4″at centerDim. a 4 ″ZTD910 28-1/2″ ZKD910 25-1/2″ Model ZET1 or ZET938 Oven requires a separate, properly grounded27-1/4 ″ min 28-1/2 ″ min -5/16 ″ maxSafety Information Adjust the RegulatorTools YOU will Need for Conversion Change Burner OrificesAdjust Burner Flames Convert LP Gas Model ZGU385LSMSS to Natural Gas Operation Installation Instructions for LP to Natural Gas Conversion Information de la sécurité Avant DE CommencerPour Votre Sécurité CI QUE Vous Devez Faire SI Voussentez LE GAZBesoins D’ÉLECTRICITÉ Information de la sécurité Avertissement DébranchezContenu Préparation à l’installation Modèles DisponiblesPièces Comprises Matériaux Dont Vous Pourriez Avoir BesoinOptions D’INSTALLATION Installation de la combinaison four simple ZET1 ou ZET938Installation au-dessus des tiroirs des armoires Planification AvancéeListe DE Vérification DE PRÉ-INSTALLATION EmballageCollé sur la face MousseDimensions ET Dégagements 8 po Min. deVers les VerticauxEmplacements DE L’ALIMENTATION DE GAZ Installations de combinaison en optionAlimentation de gaz 30,5 cm 12 poInstructions d’installation Installez LE Régulateur DE Pression suiteAvertissement ne réutilisez Avertissement n’utilisezAvertissement allumer Vérifiez les allumeursBrûleur de la Mm surface de cuisson 1/4 po Liste DE VérificationLes brûleurs doivent être régulièrement vérifiés Options d’installation Surface DE CUISSON-SPÉCIFICATIONS D’INSTALLATIONDim. a 30 PO, Modèle ZET1 OU ZET938 Renseignements SUR LA Sécurité Outils Nécessaires Pour LA ConversionChangez LES Orifices DES Brûleurs EncolureAjustez LA Flamme DU Brûleur Que sa position initialePlus la valve qu’à sa position initiale Tester la stabilité de la flammeConvertir le modèle du gaz PL ZGU385LSMSS au gaz naturel Ajustez LA Flamme DU Brûleur GE Consumer & Industrial

ZGU385L, ZGU385N specifications

The GE Monogram ZGU385N and ZGU385L are standout models in the high-end cooking appliance market, designed to elevate culinary experiences with their advanced features and sophisticated design. Both of these gas cooktops are known for their powerful performance and user-friendly technologies, making them ideal for both amateur cooks and professional chefs.

One of the primary highlights of the ZGU385N and ZGU385L is their robust heating capabilities. Equipped with dual-flame burners, these models can deliver precise heat control, allowing users to achieve the perfect simmer or rapid boil. The increased output of up to 18,000 BTUs on select burners ensures that water boils quickly and cooking times are significantly reduced. Additionally, the inclusion of a simmer burner provides the gentle heat needed for delicate sauces and risottos.

In terms of design, both models boast a sleek stainless steel finish that complements any kitchen decor. The continuous cast-iron grates provide both style and functionality, enabling pots and pans to glide effortlessly across the surface. The professional-grade knobs are ergonomically designed and offer a tactile experience, making temperature adjustments smooth and intuitive.

Cleaning these cooktops is a breeze, thanks to their sealed burners and heavy-duty grates that can be easily removed. The surface itself is designed to resist scratches and stains, ensuring that the appliance maintains its elegance even with regular use.

Moreover, the ZGU385N and ZGU385L are equipped with advanced safety features. The automatic re-ignition system ensures that if a flame accidentally goes out, the burner will reignite automatically, providing peace of mind during cooking. The cooktops are also compatible with various kitchen ventilation solutions, ensuring that smoke and odors are efficiently removed.

Another notable aspect is the flexibility of burner configurations. The cooktops come with multiple burner sizes tailored for different cooking tasks, from large pots to smaller pans. This versatility allows users to maximize their cooking potential without compromising on space.

In conclusion, the GE Monogram ZGU385N and ZGU385L are exceptional gas cooktops that seamlessly blend performance, design, and safety. Their advanced technology, powerful burners, and user-friendly features make them an excellent choice for anyone wanting to enhance their kitchen. Whether it's a simple weeknight dinner or a complex gourmet meal, these cooktops are built to deliver consistent, impressive results every time.