GE Monogram ZICS360N RH, ZICS360N LH Level Refrigerator, Secure Refrigerator To Cabinetry

Installation Instructions

STEP 5 LEVEL REFRIGERATOR

All models have 4-point leveling. The front is sup- ported by leveling legs, the rear is supported by adjustable wheels. Both are accessible from the front of the refrigerator.

•To level the back of the refrigerator, turn the 7/16" hex nut located above the front wheels. Turn clockwise to raise or counterclockwise to lower the refrigerator.

•For front leveling, use a 1-1/4" open-end wrench.

•Adjust height of refrigerator to match installation cutout opening 83-1/2 to 84-1/2". The refrigerator should be level and plumb with cabinetry.

Hex Nut Adjusts

Rear Wheels

Leveling Leg

STEP 6 SECURE REFRIGERATOR

TO CABINETRY

Whenever possible, perform this step for anti-tip security, or when anti-tip brackets cannot be used.

The refrigerator must be secured to prevent tipping.

•Raise the grille panel to access case trim.

•Drill hole in trim and drive screw through the trim into adjacent cabinet.

•Follow the same procedure on the opposite side.

Drive Screws

Through Case Trim and Into

Adjacent Cabinets

12