Installation Instructions
STEP 9A INSTALL OVERLAY PANELS Right hand models shown. Use the same instructions for left hand models.
Door Trim
Handle
Trim
Refrigerator
Door
Move
Forward
For 3/4"
Panel
Use Front Holes to Secure Handle
Use Rear Holes to Secure Trim
Supplied handle shown in the
overlay panel position.
Install door and drawer panels:
•Open door to 90°. Remove the 4 Phillips head screws from the door handle.
•Remove handle. Retain all screws.
•Remove 4 screws holding trim, lift off trim. Retain screws.
•Slide overlay panel into the door trim.
•There are two sets of holes in the handle side trim. Replace handle side trim by installing the original screws in the REAR screw holes.
•Secure the handle to the door using the FRONT screw holes.
•Follow the same procedures to install the drawer panel.
Custom handles
If you are using custom handles, the handle must be properly secured to the panel before sliding the panel into the trim.
•The cabinet manufacturer will supply the custom handle and hardware.
•Secure the door/drawer trim using both the FRONT and REAR screw holes. Discard supplied handle.
15