GE Monogram ZIC360N LH, ZICS360N RH, ZICS360N LH, ZIC360N RH Customization Basics

Page 6

Design Guide

CUSTOMIZATION BASICS:

Framed Or Overlay Panels, Custom Handles and Accessory Kits

Models Available

Stainless Steel Wrapped Models:

ZICS360N RH (right-handed door)

ZICS360N LH (left-handed door)

Trimmed models:

ZIC360N RH (right-handed door)

ZIC360N LH (left-handed door)

Stainless Steel Wrapped Refrigerators

Stainless Steel wrapped refrigerators have wrapped doors and grille panel, beveled edges, and tubular stainless steel handles that coordinate with other Monogram appliances. These models are shipped ready for installation.

Trimmed Refrigerators

Trimmed refrigerators are designed to be customized with decorative panels. Field installed custom door and grille panels are required.

Framed panels

You may install 1/4" thick custom panels from your cabinet manufacturer. The decorative panel slides into the factory installed trim. Or, order black, white and stainless steel accessory panels from your Monogram dealer.

Overlay panels

You may also choose to install custom overlay panels from your cabinet manufacturer. This design provides a seamless appearance which integrates smoothly with surrounding cabinetry.

 

3/4" Overlay Panel

Standard

.10" Thick Spacer Panel

Door Handle

1/4" Thick Backer Panel

Standard supplied handles shown in 3/4" overlay panel position.

Door and Drawer Handles

The standard supplied handles can be adjusted to accommodate both framed or overlay panels. Custom handles of your choice, supplied by your cabinet maker can also be installed. If desired, you may order ZKHCSS2 Monogram stainless steel tubular handle kit.

Side Panels

Side panels must be used whenever the sides of the refrigerator will be exposed.

Standard Door Handle

Framed Panel

Standard supplied handles shown in 1/4" panel position.

Optional Accessory Kits

•ZKHCSS2: Monogram Tubular Stainless Steel handles designed to fit framed or overlay panels.

•ZUG2: For side by side installation of two trimmed bottom-freezer refrigerators. This kit provides for the installation of a unified custom grille panel to span the width of two units using a framed or overlay panel.

•ZUGSS2: For side by side installation of two stainless steel wrapped bottom-freezer refrigerators. This kit provides a unified stainless steel grille panel to span the width of two units.

Accessory Panels

White, black and stainless steel accessory panels are available from your Monogram dealer. Panels are cut to size and ready to install.

ZPBC360–Black, ZPWC360–White,

ZPSC360–Stainless Steel Panels

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions Contents Before YOU BeginInstallation Space Dimensions and ClearancesDoor Swing Optional setting Scale Customization Basics Framed Panel Dimensions Overlay Panel DimensionsZUG2 Grille Panel Dimensions Side PanelsMaterials Required Tools RequiredHardware Supplied FlooringInstall Water Line Remove PackagingShut off the main water supply Install ANTI-TIP Brackets Water Line Installation with a Reverse Osmosis SystemInstall Side Panels Skip this step when not using an RO SystemLevel Refrigerator Secure Refrigerator To CabinetryRefrigerator must be secured to prevent tipping Adjust Door Swing Install Grille PanelRight hand models shown. Use the same instructions for Install Framed PanelsInstall door and drawer panels Left hand modelsCustom handles Connect Water Supply Connect PowerInstall Toekick Start IcemakerPage Page Page Monogram
Top Page Image Contents