Design Guide
1/4" FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door, drawer and grille.
If the custom panel is less than 1/4" thick and if it fits loosely in the door frame, it can be backed up with a piece of filler material or foam tape to improve the fit.
IMPORTANT NOTE: Maximum weight for fresh food panel is 50 pounds and 30 pounds for freezer drawer panel.
Door/Drawer
5/16" 
Trim Reveal
1/4" Panel
A
Grille Panel
Fresh Food
Panel
Freezer Drawer
Panel
B
C
D
Framed Panel Dimensions |
|
|
|
|
| A (Width) | B (Grille Height) | C (FF Height) | D (FZ Height) |
1/4" Framed Panel | ||||
Overlay Panel Dimensions |
|
|
|
|
| A (Width) | B (Grille Height) | C (FF Height) | D (FZ Height) |
1/4" Backer Panel | ||||
0.10" Spacer Panel | ||||
3/4" Overlay Panel | 9" | 22" |
3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be installed on trimmed models. The overlay panel must be secured to a 1/4" thick backer panel which slides into the trim. A spacer panel 0.10" thick must be placed between the overlay and backer panel.
IMPORTANT NOTE: Maximum total weight for assembled fresh food panel is 50 pounds and 30 pounds for freezer drawer panel.
Assemble the panels with glue and screws.
Door/Drawer
1/4"
Backer
Panel
Overlay
Panel
.10 Inch
Spacer
Overlay Panel
Spacer Panel
Backer Panel
•Center the spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue.
•Center the spacer and backer panel on the overlay panel and secure with glue and screws. Screws must be countersunk into the backer panel.
NOTE:
7