ST2-XM TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Memory Name (AM/FM) (continued)
1.Enter the Setup Menu by pressing and holding the TNR SEL button.
2.TUNER SETUP appears. Press BAND again.
3.MEMORY NAME appears on the tuner.
4.Press BAND.
5.Bank # appears.
6.Press the Tune Up/Down buttons to select the Bank #.
7.Press BAND to advance.
8.Press the Tune Up/Down buttons to select a Memory #.
9.Press BAND to advance. MEMORY NAME appears again.
10.Press BAND to access the Memory Name entry screen.
11.Press Tune Up/Down to select a character and MEM Up/Down to change a character posi- tion. Up to 12 characters can be entered one by one. A blinking cursor indicates the placement of the character being entered.
12.Press BAND when memory name is entered.
13.SAVE CHANGES will appear.
14.Press Tune Up/Down to select Yes or No.
15.Press BAND to save memory name. The Memory Name menu returns to the Memory # prompt to name other presets, or press TNR SEL to return to the Memory Name menu start.
Bank Name (AM/FM)
A custom name can be assigned to each of the six banks of Tuner 2 (AM/FM).
1.Enter the Setup Menu by pressing and holding the TNR SEL button.
2.TUNER SETUP appears. Press BAND.
3.MEMORY NAME appears. Press MEM Up/Down until BANK NAME appears on the tuner.
4.Press BAND.
5.Bank # appears.
6.Press the Tune Up/Down buttons to select the Bank #.
7.Press BAND. BANK NAME appears again.
8.Press BAND to access the Bank Name entry screen.
9.Press Tune Up/Down to select a character and MEM Up/Down to change a character posi- tion. Up to 12 characters can be entered one by one. A blinking cursor indicates the placement of the character being entered.
10.Press BAND when bank name is entered.
11.SAVE CHANGES will appear.
12.Press Tune Up/Down to select Yes or No.
13.Press BAND to save bank name. The Bank Name menu returns to the Bank # prompt to name other banks, or press TNR SEL to exit the Bank Name menu.
Region (AM/FM)
The Region procedure assigns either US or Euro to the tuner. The difference between the two is that US FM frequencies operate in .2 MHz incre- ments, while European FM frequencies operate in
.05 MHz increments.
1.Enter the Setup Menu by pressing and holding the TNR SEL button.
2.TUNER SETUP appears. Press BAND.
3.MEMORY NAME appears. Press MEM Up/Down until REGION appears on the tuner.
4.Press BAND.
5.Press the Tune Up/Down buttons to select either US or EURO.
6.Press BAND to select. Press TNR SEL to exit the REGION menu.
(END OF AM/FM TUNER SETUP)
32