Miele DA 362-75 installation instructions Installation

Page 29

Installation

The hood is designed to be installed within cabinetry and kitchen islands.

The top half (motor and fan assembly) should be accessible after installation.

If the motor and fan assembly are not accessible, assemble the ductwork and the electical connection before the installation.

^Insert and align the hood from the bottom up in the cut out as seen in the illustration.

^Secure the hood through the frame with 12 screws (3.5 x 16 mm).

29

Image 29
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use Only if Evacuate and Call the Fire DepartmentTo reduce the risk of fire only use metal ductwork InstallationAir extraction Recirculation modeFunctional description Guide to the hood Fan power scale Delay Shut Down Main power switchJoystick Overhead lighting Grease filter Charcoal filtersOperation Intensive setting Selecting the power levelTurning on the fan Fan performanceAutomatic Safety Shut Off Delayed Shut DownTurning off the fan Overhead lightingChecking the filter timers Filter timersGrease filter timer Charcoal filtersReprogramming the grease filter timer Reprogramming the timersReprogramming the charcoal filter timer Cleaning the casing Cleaning and careStainless steel Stainless steel colored controlsGrease filters Cleaning the grease filtersInserting the grease filters Active charcoal filters Remove the grease filter Changing the light bulbAfter Sales Service Page Installation Instructions Disposal of an old appliance Caring for the environmentDisposal of packing material This Appliance Must be Grounded Electrical dataCut out dimensions Appliance dimensionsAppliance dimensions Installation Installation Exhaust connection Air extraction mode Non-return flapsReducing collar For DA Recirculation mode Reducing collarRecirculation connection Installing the joystick Joystick extension Electrical connection Air extraction Air extraction Page Page Page Alteration rights reserved