Miele DA 362-75 Air extraction mode Non-return flaps, Reducing collar, Exhaust connection

Page 30

Installation

Air extraction mode

Non-return flaps

^Place the non-return flaps into the exhaust connections at the top of the motor assembly so that the flaps open in the "up" direction.

^Turn the non-return flaps slightly to the left to lock them in place.

Reducing collar

^If using 5" (125 mm) ducting, place the reducing collars into the exhaust connections and turn left to lock them in place.

Exhaust connection

^Connect the ductwork to the exhaust connection using appropriate measures for the type of ductwork being installed (hose clamp, duct tape, etc.).

Note:

A Y- adapter is supplied with the

DA 362-110. It may be used to feed the exhaust from both connections to a common duct.

30

Image 30
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use Evacuate and Call the Fire Department Only ifInstallation To reduce the risk of fire only use metal ductworkRecirculation mode Functional descriptionAir extraction Guide to the hood Joystick Main power switchFan power scale Delay Shut Down Overhead lighting Grease filter Charcoal filtersOperation Turning on the fan Selecting the power levelIntensive setting Fan performanceTurning off the fan Delayed Shut DownAutomatic Safety Shut Off Overhead lightingGrease filter timer Filter timersChecking the filter timers Charcoal filtersReprogramming the timers Reprogramming the grease filter timerReprogramming the charcoal filter timer Stainless steel Cleaning and careCleaning the casing Stainless steel colored controlsCleaning the grease filters Grease filtersInserting the grease filters Active charcoal filters Changing the light bulb Remove the grease filterAfter Sales Service Page Installation Instructions Caring for the environment Disposal of packing materialDisposal of an old appliance Electrical data This Appliance Must be GroundedAppliance dimensions Cut out dimensionsAppliance dimensions Installation Installation Air extraction mode Non-return flaps Reducing collarExhaust connection Recirculation mode Reducing collar For DARecirculation connection Installing the joystick Joystick extension Electrical connection Air extraction Air extraction Page Page Page Alteration rights reserved