Cleaning and care
Active charcoal filters
In recirculation mode four active charcoal filters must be used in addition to the grease filters. The charcoal filters are designed to absorb cooking odors. They are located in the canopy above the grease filters.
Active charcoal filters can be ordered from Technical Service.
USA
CDN
Please quote part # 03 174 713
^The grease filters must be removed to acces the active charcoal filters (see "Cleaning and Care / Grease filters").
^Insert the charcoal filters and fasten with the enclosed screws.
^Return the grease filters.
Before using:
^Program the charcoal filter timer, see "Operation/Reprogramming the charcoal filter timer".
Replace the active charcoal filters when the charcoal filter indicator lights. These filters should be replaced at least every 6 months or when they no longer absorb odors efficiently.
^After replacing the charcoal filters, press and hold the charcoal filter button for 3 seconds to reset the timer. The indicator light will go out.
^If the charcoal filters are replaced before the timer has reached its maximum, the charcoal filter button should be pressed for 6 seconds to reset the counter to zero.
19