Roberts Radio RecordR manual Finding new stations DAB, Signal strength display DAB

Finding new stations - DAB

As time passes new stations may become available. To find new stations proceed as follows.

1.Press and hold the Info button.

2.Press the Tuning Up or Down buttons until 'Auto Tune' appears on the display.

3.Press and release the Select button. Your radio will perform a scan of the Band III DAB channels. As new stations are found, the station counter on the right-hand side of the display will increase and stations will be added to the list.

1

2 2

		3
Signal strength display - DAB
1.	Repeatedly press and release the Info button until the lower line of
	the display shows signal strength.
2.	Position your radio and try adjusting the aerial as to give maximum	1
	number of black rectangles on the signal strength display. Normally,
	the best reception will be found with the aerial fully extended.

3.The clear unfilled rectangle indicates minimum signal level required for satisfactory reception.

If you need any further advice, please call our Technical Helpline on :-	10
020 8758 0338 (Mon-Fri)