Using the AC adaptor
1.Place your radio on a flat surface.
2.Fully extend the telescopic aerial. The aerial should be fully extended and positioned vertically for optimum reception.
3.Insert the adaptor plug into the DC socket located on the left hand side of your radio. Plug the adaptor into a standard 13 amp mains socket outlet. The display will show 'Welcome ROBERTS' for a few seconds.
IMPORTANT: The mains adaptor is used as the means of connecting the radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.
Characters appearing on the LCD display indicate that the radio is connected to and powered from the mains supply.
5