Roberts Radio RecordR manual Presetting stations, Recalling a preset station

Presetting stations

You may store your preferred DAB and FM radio stations to the preset station memories. There are 10 memory presets in your radio, 5 for DAB and 5 for FM. Presets are remembered by your radio in the event of a power failure. The procedure for setting presets and using them to tune stations is the same for FM and DAB modes, and is described below.

1.Press the On / Off button to switch on the radio.

2.Press and release the Band button to select the desired waveband.

3.Tune to the required station as previously described.

4.Press and hold the required Preset button 1-5 until the display shows, for example, 'DAB 1 Preset saved'. The station will be stored under the chosen preset. Repeat this procedure for the remaining presets.

5.Stations which have been stored in preset memories may be overwritten by following the above procedure.

Recalling a preset station

1.Press the On / Off button to switch on the radio.

2.Press and release the Band button to select the desired waveband.

3.Press and release the required Preset button 1-5. The display will show, for example, 'Preset empty' if no station has been stored to that preset. If a preset has been stored, your radio will tune to the chosen preset station stored in the preset memory.

2

4

2

3

If you need any further advice, please call our Technical Helpline on :-	18
020 8758 0338 (Mon-Fri)