Stereo / Mono setting - FM (headphones only)
Your radio will play stereo FM broadcasts in stereo (via headphones) provided that the received signal is of adequate strength. However, as a stereo signal becomes weaker the audio signal will become poorer. It may be preferable to force the radio to play the station in mono in order to reduce the level of backgound hiss.
1.Press the On / Off button to switch on your radio.
2.Tune to the required FM radio station as previously described (see pages 13, 14).
3.Press and hold the Info button. The display will show 'FM Audio'.
4.Press and release the Select button. The current audio setting will show on the display.
5.Press the Tuning Up or Down buttons until 'Mono' appears on the display. Press and release the Select button. While this setting is engaged, the radio will play the current station in mono.
The Mono override is a temporary setting and is applied to the currently tuned station only. It is cancelled automatically by tuning to another radio station.
6.If you wish to cancel the Mono override while listening to the currently tuned radio station, follow steps 3 - 5 above and select 'Auto'. The radio will then play the current station in stereo if the signal is sufficiently strong.
3
4,5 
5 5
If you need any further advice, please call our Technical Helpline on :- | 16 |
020 8758 0338 |