System reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.
1.Ensure your radio is switched on. Press and hold the Info button.
2.Press and release the Tuning Up or Down buttons until 'Factory Reset' appears on the display. Press and release the Select button.
3.Press and release the Tuning Up or Down buttons until 'Yes' appears on the display. If you do not wish to carry out a system reset, highlight 'No' and then press the Select button. The display will revert to the previous display.
4.With 'Yes' displayed, press and release the Select button. A full reset will be performed. The station list and presets will be erased. Timers and alarms will be cancelled and sleep and nap timer settings will be set to their default values. The display will show 'Welcome ROBERTS' and after a few seconds a station scan search will be performed automatically. The display will show progress of the station search. The number on the right of the display is the number of stations that have been found.
In case of malfunction due to electrostatic discharge, reset the product as above to resume normal operation.
It may be necessary in some cases to disconnect the mains power and remove batteries, then reconnect power after 10 seconds.
If a problem persists our technical staff would be pleased to offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.
1
2,3 2,3
2,4 
41