15.Press and release the Select button. The record start hour will flash on the display. To set the hour, press the Tuning Up or Down buttons.
Press and hold the Tuning Up or Down buttons to advance the time quickly.
16. Press and release the Select button. The minute digits will flash on the display. To set the minutes, press the Tuning Up or Down buttons.
17. Press and release the Select button. The record end hour will flash on the display. To set the hour, press the Tuning Up or Down buttons.
15-19 15-19
18.Press and release the Select button. The minute digits will flash on the display. To set the minutes, press the Tuning Up or Down buttons.
19.Press and release the Select button to confirm your record timer settings. The display will show 'Exit with saving'.
20.Press and release the Select button to save your settings.
Note: Once the timed record function has been set the timer record icon 
will appear in the display when the unit is in standby. If the SD card is
absent or 
instead of 
.
If your radio is in the standby mode it will switch on at the selected record time and the radio will tune to the station specified for the timed recording.
If your radio is already playing it will tune to the station specified for the timed recording.
The record icon 
will appear on the display while the radio is recording. The radio will go to Standby after the recording is completed.
If the SD card is absent, the radio will still switch on and play the specified radio station for the duration required.
If you need any further advice, please call our Technical Helpline on :- | 26 |
020 8758 0338 |