Miele KWT 1601 SF, KWT 1611 SF installation instructions Alarm, Temperature alarm, Door alarm

Page 14

Alarm

The appliance is equipped with an alarm system, to ensure that the temperature does not rise unnoticed because of energy loss or an open door.

The alarm system is always operational, it does not need to be turned on.

Temperature alarm

If the temperature becomes too warm, an alarm sounds, the "alarm" indicator turns red and flashes. At the same time the affected zone flashes in the display.

If you use the Home Security System, a temperature alarm will also trigger your security alarm. Once the temperature alarm is turned off, the security alarm will also shut off.

The alarm will sound and the display will flash if:

too much warm air flows into the appliance, for example when bottles are being loaded, re-arranged, or unloaded.

a large number of bottles are being stored for the first time.

the power fails.

As soon as the alarm condition is corrected, the alarm signal turns off and the affected zone stops flashing in the display. The "alarm" indicator goes out.

Turning the temperature alarm Off

￿To turn the alarm off early, press the "alarm" sensor button.

The alarm signal turns off. The "alarm" indicator remains red and the corresponding appliance zone continues to flash until the alarm condition is corrected.

Door alarm

If the appliance door is left open for over 5 minutes, an alarm signal will sound and the "alarm" indicator will light up.

Once the door is shut again the alarm will stop and the 'alarm' indicator will go out.

Turning the door alarm Off

￿To turn the alarm off early, press the "alarm" sensor button. The "alarm" indicator and signal will turn off.

14

Image 14
Contents En US, CA Contents Contents Important Safety Instructions Electrical safetyInstallation UseSave These Instructions Disposal of your old applianceGuide to the wine storage unit Control panel Turning the appliance On/Off Before using for the first timeBefore use Settings Using the settingsCustom settings Function Display textTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Optimum temperature and air qualityTemperature Temperature ranges Temperature display Insulation panels for thermal separationTemperature unit Fahrenheit/Celsius Setting the humidity level HumidityAir filtering with an active charcoal filter Storing wine Storage tipsBottle display rack Maximum capacityTurning off Display lightingTurning on Duration of the display lighting Defrosting To better maintain your appliance avoid the following Cleaning and careRemove the cleaner promptly Appliance door Before cleaningCleaning the interior Ventilation slitsChanging the light bulbs After cleaningActive charcoal filters Interior lightingCleaning and care Frequently asked questions What if the temperature is too low?White coating has formed around the wine corks What if the alarm is ringing? Possible fault SolutionWhat if the display lighting is not working? Mildew is beginning to form on the wine bottle labelsSssrrrrr Blubb, blubbClick CreakingAfter sales service MieleCareInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Furniture/fixtures Installation nicheBase VentilationSingle column Installation optionsAppliances attached together using the Merging Kit Side-by-sideInstallation with partition without using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition using the Merging Kit Side panelsDimensions Door dimensions open minNiche dimensions KWT 16x1 SF 24 ½ 622.2 mm 24 610 mmPower supply KWT 16X1 SF 12 305 mmBefore you begin Tools needed for installationOptional accessories OtherAligning the housing unit Check the installation niche Before installationRemoteVision module installation Installation Home Security System HSS Anti-tip-brackets Preparing the installation nicheMounting Accessories Installation Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision Page Alteration rights reserved Nr 223 770