Miele KWT 1611 SF, KWT 1601 SF installation instructions Installation, Use

Page 5

IMPORTANT SAFETY INSTRUCTIONS

Installation

This appliance is top-heavy and must be secured to prevent the possibility of tipping forward.

Keep the door closed until the appliance is completely installed and secured per installation instructions.

￿This appliance must be installed and connected in compliance with the installation instructions.

￿Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.

￿Do not operate any appliance with a damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele’s Technical Ser- vice Department.

￿This appliance must not be used in a non-stationary location (e.g. on a ship).

￿Do not install the appliance in a room with too low an ambient temperature, e.g., a garage, as this may lead to the appliance switching off for longer periods so that it cannot maintain the required temperature.

Use

￿This appliance is not designed for commercial use. It is intended for use in domestic households and in similar working and residential environments such as:

shops, offices and similar work environments

by customers in hotels, motels, Bed & Breakfasts or similar residential environments.

￿This appliance is not intended for outdoor use.

￿Persons who lack physical, sensory or mental abilities, or experience with the machine should not use it without supervision or instruction by a responsible person.

￿To reduce the risk of injury, do not allow children to play in, on or near the appliance, especially in the door hinge area.

￿Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

￿Do not use any oils or grease on the door seal, as these will cause the seal to deteriorate and become porous with time.

￿Do not block the ventilation gaps in the plinth or the top of the appliance housing unit as this would impair the efficiency of the appliance, increase the electricity consumption and could cause damage to the appliance.

5

Image 5
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the wine storage unit Control panel Turning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Optimum temperature and air qualityTemperature Temperature ranges Insulation panels for thermal separation Temperature displayTemperature unit Fahrenheit/Celsius Humidity Setting the humidity levelAir filtering with an active charcoal filter Storage tips Storing wineMaximum capacity Bottle display rackTurning off Display lightingTurning on Duration of the display lighting Defrosting To better maintain your appliance avoid the following Cleaning and careRemove the cleaner promptly Cleaning the interior Before cleaningAppliance door Ventilation slitsActive charcoal filters After cleaningChanging the light bulbs Interior lightingCleaning and care What if the temperature is too low? Frequently asked questionsWhat if the display lighting is not working? What if the alarm is ringing? Possible fault SolutionWhite coating has formed around the wine corks Mildew is beginning to form on the wine bottle labelsClick Blubb, blubbSssrrrrr CreakingMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Base Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsSingle column Side-by-sideInstallation with partition using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition without using the Merging Kit Side panelsDoor dimensions open min DimensionsKWT 16x1 SF 24 ½ 622.2 mm 24 610 mm Niche dimensionsKWT 16X1 SF 12 305 mm Power supplyOptional accessories Tools needed for installationBefore you begin OtherBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Installation Home Security System HSS Anti-tip-brackets Preparing the installation nicheMounting Accessories Installation Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision Page Alteration rights reserved Nr 223 770