Miele KWT 1611 SF, KWT 1601 SF installation instructions Electrical connection

Page 55

Electrical connection

￿Avoid the risk of electrical shock

-Plug into a grounded 3-prong outlet.

-Do not move the ground plug.

-Do not use an adapter.

-Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Improper connection of the equipment grounding conductor may result in electric shock. If you are in any doubt as to whether the appliance has been properly grounded, have the appliance checked by a qualified electrician or service technician.

Installation, repairs and other work by unqualified persons could be dangerous.

Before installing the appliance, verify that the voltage, load and circuit rating information found on the data plate match the household electrical supply.

If there are any questions regarding the electrical connection of this appliance to the power supply, please consult a licensed electrician or call the Miele Technical Service.

￿1-800-999-1360

￿1-800-565-6435

The appliance is supplied with a UL-listed, 3-wire power cord and NEMA 5-15 P plug ready for connection to a 120 V, 60 Hz supply.

The fuse rating is 15 amps.

The appliance requires a 3-wire receptacle.

The receptacle must be installed by a licensed electrician only.

In the case of side-by-side installations, a separate outlet must be used for each appliance. Ideally, the power outlet should be next to the appliance and easily accessible. Do not connect the appliance to the power supply by an extension cord. Extension cords do not guarantee the required safety of the appliance (danger of overheating).

If any changes are needed to the household wiring or power supply, this work must be performed by a qualified electrician.

55

Image 55
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the wine storage unit Control panel Before use Before using for the first timeTurning the appliance On/Off Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Temperature alarm AlarmDoor alarm Temperature Optimum temperature and air qualitySetting the temperature Temperature ranges Insulation panels for thermal separation Temperature displayTemperature unit Fahrenheit/Celsius Humidity Setting the humidity levelAir filtering with an active charcoal filter Storage tips Storing wineMaximum capacity Bottle display rackTurning on Duration of the display lighting Display lightingTurning off Defrosting Remove the cleaner promptly Cleaning and careTo better maintain your appliance avoid the following Ventilation slits Before cleaningCleaning the interior Appliance doorInterior lighting After cleaningActive charcoal filters Changing the light bulbsCleaning and care What if the temperature is too low? Frequently asked questionsMildew is beginning to form on the wine bottle labels What if the alarm is ringing? Possible fault SolutionWhat if the display lighting is not working? White coating has formed around the wine corksCreaking Blubb, blubbClick SssrrrrrMieleCare After sales serviceInstallation instructions Disposal of packing materials Caring for the environmentDisposal of an old appliance Installation site InstallationEmpty weight of your machine Ventilation Installation nicheBase Furniture/fixturesSide-by-side Installation optionsAppliances attached together using the Merging Kit Single columnSide panels Adjusting the door opening angle optional accessoryInstallation with partition using the Merging Kit Installation with partition without using the Merging KitDoor dimensions open min DimensionsKWT 16x1 SF 24 ½ 622.2 mm 24 610 mm Niche dimensionsKWT 16X1 SF 12 305 mm Power supplyOther Tools needed for installationOptional accessories Before you beginBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Installation Home Security System HSS Mounting Accessories Preparing the installation nicheAnti-tip-brackets Installation Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Status indicators Description of functionSelectable Description of function Options Page Alteration rights reserved Nr 223 770