Miele KWT 1611 SF, KWT 1601 SF installation instructions Attaching the toe-kick cover

Page 53

	Installation
Attaching the toe-kick cover
The maximum height of the toe-kick
cover is 4" (102 mm) from the top of
the floor. Do not cover ventilation
slits in the plinth. Risk of damage to
the appliance.
If required, cut the toe-kick cover to
the required length and height.
	Remove the foil from the adhesive
	strips.
	Attach the toe-kick cover to the
Attach the plinth to the appliance.	plinth.
Attach the plinth to the appliance.

Put the included cover plates in place.

53

Image 53

Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the wine storage unit Control panel Turning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Optimum temperature and air qualityTemperature Temperature ranges Insulation panels for thermal separation Temperature displayTemperature unit Fahrenheit/Celsius Humidity Setting the humidity levelAir filtering with an active charcoal filter Storage tips Storing wineMaximum capacity Bottle display rackTurning off Display lightingTurning on Duration of the display lighting Defrosting To better maintain your appliance avoid the following Cleaning and careRemove the cleaner promptly Cleaning the interior Before cleaningAppliance door Ventilation slitsActive charcoal filters After cleaningChanging the light bulbs Interior lightingCleaning and care What if the temperature is too low? Frequently asked questionsWhat if the display lighting is not working? What if the alarm is ringing? Possible fault SolutionWhite coating has formed around the wine corks Mildew is beginning to form on the wine bottle labelsClick Blubb, blubbSssrrrrr CreakingMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Base Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsSingle column Side-by-sideInstallation with partition using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition without using the Merging Kit Side panelsDoor dimensions open min DimensionsKWT 16x1 SF 24 ½ 622.2 mm 24 610 mm Niche dimensionsKWT 16X1 SF 12 305 mm Power supplyOptional accessories Tools needed for installationBefore you begin OtherBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Installation Home Security System HSS Anti-tip-brackets Preparing the installation nicheMounting Accessories Installation Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision Page Alteration rights reserved Nr 223 770