Miele KWT 1611 SF, KWT 1601 SF Frequently asked questions, What if the temperature is too low?

Page 29

Frequently asked questions

With the aid of the following guide minor problems can be corrected without a ser- vice call.

Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty.

What if the appliance does not get cold?

Possible fault

Solution

 

 

The machine is not turned on.

Check whether the appliance is

 

switched on at the main switch.

 

 

The machine is not plugged in.

Check that the plug is correctly

 

inserted in the power outlet.

 

 

Check that the fuse has not tripped.

Reset the circuit breaker.

 

If the breaker trips again the appliance

 

or the outlet may be defective. Contact

 

Miele or a qualified electrician.

 

 

The temperature is set incorrectly.

Check the display.

 

 

What if the temperature is too low?

 

Select a warmer temperature.

See "Setting the temperature".

 

 

The door is not closed.

Check that the door has been closed

 

properly.

 

 

A large amount of bottles has been put

This makes the compressor run for

in the appliance at the same time.

longer, causing the temperature in the

 

appliance to fall automatically.

 

 

What if the compressor kicks on very frequently and for too long?

The ventilation slits in the plinth and in

Clean with a vacuum or brush.

the top of the appliance are covered or

 

dusty.

 

 

 

The door has been opened too

Once the appliance returns to the set

frequently.

temperature the compressor will turn

 

off.

 

 

The door is not closed.

Check that the door has been closed

 

properly.

 

 

29

Image 29
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the wine storage unit Control panel Turning the appliance On/Off Before using for the first timeBefore use Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Door alarm AlarmTemperature alarm Setting the temperature Optimum temperature and air qualityTemperature Temperature ranges Insulation panels for thermal separation Temperature displayTemperature unit Fahrenheit/Celsius Humidity Setting the humidity levelAir filtering with an active charcoal filter Storage tips Storing wineMaximum capacity Bottle display rackTurning off Display lightingTurning on Duration of the display lighting Defrosting To better maintain your appliance avoid the following Cleaning and careRemove the cleaner promptly Cleaning the interior Before cleaningAppliance door Ventilation slitsActive charcoal filters After cleaningChanging the light bulbs Interior lightingCleaning and care What if the temperature is too low? Frequently asked questionsWhat if the display lighting is not working? What if the alarm is ringing? Possible fault SolutionWhite coating has formed around the wine corks Mildew is beginning to form on the wine bottle labelsClick Blubb, blubbSssrrrrr CreakingMieleCare After sales serviceInstallation instructions Disposal of an old appliance Caring for the environmentDisposal of packing materials Empty weight of your machine InstallationInstallation site Base Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsSingle column Side-by-sideInstallation with partition using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition without using the Merging Kit Side panelsDoor dimensions open min DimensionsKWT 16x1 SF 24 ½ 622.2 mm 24 610 mm Niche dimensionsKWT 16X1 SF 12 305 mm Power supplyOptional accessories Tools needed for installationBefore you begin OtherBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Installation Home Security System HSS Anti-tip-brackets Preparing the installation nicheMounting Accessories Installation Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Selectable Description of function Options Status indicators Description of functionMasterCool control panel options for RemoteVision Page Alteration rights reserved Nr 223 770