Miele KWT 1611 SF, KWT 1601 SF Installation options, Single column, Side-by-side

Page 37

Installation

Installation options

There are many different installation options. You are limited only by the design of the kitchen.

The door hinge cannot be exchanged.

Single column

The appliance can be installed at any preferred location in the kitchen.

However, be sure the door will open and close properly in the chosen location.

Side-by-side

This appliance can be installed "side-by-side" with another fridge/freezer using a "Merging Kit".

The "Merging Kit" is available from Miele.

Contact Miele or your dealer for specific information about which combinations will work with your appliance.

For instructions on how to attach the appliances and install the heating mat, please refer to the instructions included with the "Merging Kit", available from Miele.

Appliances attached together using the "Merging Kit"

If the appliances are installed directly next to each other (without a partition), they need to be attached together using the "Merging Kit".

37

Image 37
Contents En US, CA Contents Contents Electrical safety Important Safety InstructionsUse InstallationDisposal of your old appliance Save These InstructionsGuide to the wine storage unit Control panel Before use Before using for the first timeTurning the appliance On/Off Using the settings SettingsFunction Display text Custom settingsTurning the button sound On/Off Turning off for longer periods of time Temperature alarm AlarmDoor alarm Temperature Optimum temperature and air qualitySetting the temperature Temperature ranges Insulation panels for thermal separation Temperature displayTemperature unit Fahrenheit/Celsius Humidity Setting the humidity levelAir filtering with an active charcoal filter Storage tips Storing wineMaximum capacity Bottle display rackTurning on Duration of the display lighting Display lightingTurning off Defrosting Remove the cleaner promptly Cleaning and careTo better maintain your appliance avoid the following Cleaning the interior Before cleaningAppliance door Ventilation slitsActive charcoal filters After cleaningChanging the light bulbs Interior lightingCleaning and care What if the temperature is too low? Frequently asked questionsWhat if the display lighting is not working? What if the alarm is ringing? Possible fault SolutionWhite coating has formed around the wine corks Mildew is beginning to form on the wine bottle labelsClick Blubb, blubbSssrrrrr CreakingMieleCare After sales serviceInstallation instructions Disposal of packing materials Caring for the environmentDisposal of an old appliance Installation site InstallationEmpty weight of your machine Base Installation nicheFurniture/fixtures VentilationAppliances attached together using the Merging Kit Installation optionsSingle column Side-by-sideInstallation with partition using the Merging Kit Adjusting the door opening angle optional accessoryInstallation with partition without using the Merging Kit Side panelsDoor dimensions open min DimensionsKWT 16x1 SF 24 ½ 622.2 mm 24 610 mm Niche dimensionsKWT 16X1 SF 12 305 mm Power supplyOptional accessories Tools needed for installationBefore you begin OtherBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Installation Home Security System HSS Mounting Accessories Preparing the installation nicheAnti-tip-brackets Installation Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover Mounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Status indicators Description of functionSelectable Description of function Options Page Alteration rights reserved Nr 223 770